FPS Heavy Duty Fire Pumps

FPS - Heavy Duty Fire Pumps

Heavy Duty Fire Pumps

Our heavy duty fire pumps are a true workhorse and designed for continuous duty when it really matters. With rapid self priming capabilities and made to transfer high volumes of water at medium to high pressures.

16 Recent Views In Stock

Complete with 3" bronze inlet (A3HD) or for better flow conditions a 4" inlet (A4HD). Solidly constructed with a durable cast iron impeller, heavy duty aluminium casing and solid bronze inlet and outlet. Available complete with a variety of diesel or petrol drive units that are easily maintained for a long service life. Also available in a bare shaft configuration. This pump can be supplied with a Zinc free Bronze casing and impeller for pumping salt water.

Key Features:

Performance curves are based on a kinematic viscosity value of 1mm²/s and a density of 1000Kg/m³ at 20 degree
Flow rates up to 97 m³/h
Heads up to 69m
Suction heads up to 8m
Fluids must be clean and free from suspended abrasive particles
Maximum fluid temperature: +35 degree
Maximum ambient temperature: +50 degree
Maximum allowable pressure in casing: 10 Bar
Rotational speed: Nominal speed 3000rpm, maximum speed 3600rpm.
Electric start units available upon request
Zinc free bronze construction available upon request.

To contact Finsbury Pump System about FPS Heavy Duty Fire Pumps use Get a quote.

Key Features:

Performance curves are based on a kinematic viscosity value of 1mm²/s and a density of 1000Kg/m³ at 20 degree
Flow rates up to 97 m³/h
Heads up to 69m
Suction heads up to 8m
Fluids must be clean and free from suspended abrasive particles
Maximum fluid temperature: +35 degree
Maximum ambient temperature: +50 degree
Maximum allowable pressure in casing: 10 Bar
Rotational speed: Nominal speed 3000rpm, maximum speed 3600rpm.
Electric start units available upon request
Zinc free bronze construction available upon request.