FPS - Totton Magnetic Drive Centrifugal Pumps | NEMP80-6 Series

Key Features:

• Manufactured in chemical resistant thermo-plastics – entirely non-metallic
• Magnetic couplings provide an energy efficient thermal shield, minimising heat transfer to the pumped fluids
• Variable pump body orientation
• Compatible with standard pushfit fittings
• IP55 standard motor housing     
• Performance curves are based on a kinematic viscosity value of 1mm²/s and a density of 1000 Kg/m³ at 20ºC.          
• Flow rates up to 80 Litres per minute.
• Heads up to 5.5m.
• Maximum suction head up to 7m.
• Fluids must be clean and free from suspended abrasive particles.
• Maximum fluid temperature: +85ºC.
• Minimum fluid temperature: -20ºC.
• Maximum ambient temperature: +40ºC.
• Rotational speed: 2900rpm.

To contact Finsbury Pump System about FPS Totton Magnetic Drive Centrifugal Pumps | NEMP80-6 Series use Get a quote.

Key Features:

• Manufactured in chemical resistant thermo-plastics – entirely non-metallic
• Magnetic couplings provide an energy efficient thermal shield, minimising heat transfer to the pumped fluids
• Variable pump body orientation
• Compatible with standard pushfit fittings
• IP55 standard motor housing     
• Performance curves are based on a kinematic viscosity value of 1mm²/s and a density of 1000 Kg/m³ at 20ºC.          
• Flow rates up to 80 Litres per minute.
• Heads up to 5.5m.
• Maximum suction head up to 7m.
• Fluids must be clean and free from suspended abrasive particles.
• Maximum fluid temperature: +85ºC.
• Minimum fluid temperature: -20ºC.
• Maximum ambient temperature: +40ºC.
• Rotational speed: 2900rpm.

Read less...

To contact Finsbury Pump System about FPS Totton Magnetic Drive Centrifugal Pumps | NEMP80-6 Series use Get a quote.