TDA Pumps | Magnetic Drive Centrifugal ...

TDA Pumps | Magnetic Drive Centrifugal Pumps

Supplier: TDA Pumps

1/3

The Magnetic Drive Centrifugal Pumps head is manufactured with few components, thus the maintenance of it becomes extremely easy.

20 Recent Views In Stock

Magnetic Drive Centrifugal Pumps materials are of two types used as standard:

Polypropylene (pp)
Polyvinylidene fluoride (pvdf).

Features & Benefits:

Positive suction head operation
Weldless
High flow rates: from 5 TO 35 M3/H
Quick and easy maintenance
Inexpensive spares
No possibility of fluid leakage
Head: Up to 24 MT
Viscosity: Up to 150 CPS

Specifications:

Motors:

Standard IEC – IP 55 – CLASS F – 2 POLE – 2.900RPM

Optional: THREE PHASE 230/400V 50/60 HZ

Single phase 230V 50/60 HZ

Working temperatures:

PP min +3°C/max +65°C

PVDF min +3°C/max +95°C

A couple of magnets leads the operation of the pump; the outer magnet placed on the drive shaft transmits the motion to the inner magnet integrated with the impeller that is hermetically insulated. The pump impeller is not physically fixed to the drive shaft, seals are therefore eliminated and this consequently avoids leakages of the liquid drawn by the pump.

To contact TDA Pumps about TDA Pumps | Magnetic Drive Centrifugal Pumps use Get a quote.

Magnetic Drive Centrifugal Pumps materials are of two types used as standard:

Polypropylene (pp)
Polyvinylidene fluoride (pvdf).

Features & Benefits:

Positive suction head operation
Weldless
High flow rates: from 5 TO 35 M3/H
Quick and easy maintenance
Inexpensive spares
No possibility of fluid leakage
Head: Up to 24 MT
Viscosity: Up to 150 CPS

Specifications:

Motors:

Standard IEC – IP 55 – CLASS F – 2 POLE – 2.900RPM

Optional: THREE PHASE 230/400V 50/60 HZ

Single phase 230V 50/60 HZ

Working temperatures:

PP min +3°C/max +65°C

PVDF min +3°C/max +95°C

Read less...

To contact TDA Pumps about TDA Pumps | Magnetic Drive Centrifugal Pumps use Get a quote.

AI Overview BETA

TDA Pumps’ magnetic drive centrifugal pumps transfer liquids through an impeller, with flow rates ranging from 5 to 35 m³/h. The drive-shaft magnet turns an insulated impeller magnet without a physical shaft connection, eliminating seals and avoiding fluid leakage. Pump heads are made from polypropylene or polyvinylidene fluoride, giving buyers a choice between two head materials.

Positive suction head operation
Maximum head: 24 m
Handles viscosity up to 150 CPS
Operating temperatures: PP +3°C to +65°C; PVDF +3°C to +95°C
Standard motor: IEC, IP55, Class F, 2-pole, 2,900 RPM

Source: listing by TDA Pumps on IndustrySearch · Updated 1 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let TDA Pumps provide you with a quote