This model is a digital manometer with two independent pressure switch outputs. The gauge employs microprocessor technology which produces highly accurate results. All readings are linearised and temperature corrected, to give an accuracy of 0.1% FS.
There are two independent switches for High and Low control functions. These are solid state and therefore not subject to wear. The switch points are programmed directly from the two front panel buttons and a menu system. Alternatively this pressure switch can be connected via the RS485 link to a computer, and configured using the “Pressure Switch Console” software. User defined configurations can be stored on the computer for future reference.
Two independent floating switches are available. Neither is subject to wear and they can be operated individually as make or break contacts. The switch can provide a window function or be utilised as a hysteresis switch. These switching functions enable the dV-2 PS to assume control tasks. Respective switch output status is displayed on an LED located on the front.
The zero point on the pressure switch can be changed with the zero function, and max/min values can be reset at any time. The pressure can be displayed in bar, MPa or PSI. Pressure ranges are available from 0-4 bar to 0-700 bar, and accuracy is 0.1% FS, which includes linearity, repeatability, hysteresis and temperature error. Switch delay is 30ms, while temperature range is 10-40°C. Protection is to a rating of IP64.
Bestech Australia | Measurement Equipment & Technical Training Systems
Bestech Australia was founded in 2002 in Melbourne and is now one of the fastest growing companies in Australia and New Zealand, distributing and manufacturing sensors, transducers, signal conditioners and test systems for measurement of physical parameters like Leak, Displacement, Tilt, Pressure, Temperature, Strain, Force, Torque, Vibration, Viscosity, Level, Flow, and Material Properties. Bestech Australia also carries a full range of technical teaching equipment and programmes for electrical/electronics, civil, mechanical and chemical engineering as well as automotive and avionics training.
Bestech Australia supplies state of the art instruments from world leading manufacturers, and provides quality customer service. Bestech delivers a wide range of products for university and research laboratories as well as various applications in manufacturing, military, mining, steel, rail, construction, automotive, chemical, pharmaceutical, food and water industries.
In addition, Bestech Australia has well trained engineers to provide advice and guidance on specific applications and products selection. We offer full support including repair, maintenance and calibration.