Insulation Piercing Connector | TTD Series | TTD151XFA

The Sicame TTD range of insulation piercing connectors (IPCs) provide a fast, convenient and reliable method of connecting overhead low voltage mains to services or other mains.

All common types of conductors can be interconnected, including insulated aluminium or copper. The connectors have been tested to AS4396 and are approved for use by Australian power distribution utilities.

Application:

• Mains cable: Insulated copper or aluminium
• Tap cable: Insulated copper or aluminium

Features:

• Provides a fully sealed, waterproof connection
• No need to strip cable to make the connection
• Simultaneous piercing on main & tap
• Torque controlling shear heads on all bolts
• Tightening bolts do not come into contact with live components
• Captive end cap for protection of tap cable, which can be mounted on either side.
• Fully bimetallic
• Stainless steel fasteners

Testing Specification:

Tested to AS4396

Installation Notes:

When using 2 bolt connectors from this range, each bolt must be tightened a 1/4 to 1/2 turn alternately, until the shear head operates.

For tightening the shear head bolts, use only a 13mm AF, six sided hexagon socket (17mm AF for models
TTD431XFA, TTD451XFA & TTD551FJA models).

To contact Sicame Australia about Insulation Piercing Connector | TTD Series | TTD151XFA use Get a quote.

The Sicame TTD range of insulation piercing connectors (IPCs) provide a fast, convenient and reliable method of connecting overhead low voltage mains to services or other mains.

All common types of conductors can be interconnected, including insulated aluminium or copper. The connectors have been tested to AS4396 and are approved for use by Australian power distribution utilities.

Application:

• Mains cable: Insulated copper or aluminium
• Tap cable: Insulated copper or aluminium

Features:

• Provides a fully sealed, waterproof connection
• No need to strip cable to make the connection
• Simultaneous piercing on main & tap
• Torque controlling shear heads on all bolts
• Tightening bolts do not come into contact with live components
• Captive end cap for protection of tap cable, which can be mounted on either side.
• Fully bimetallic
• Stainless steel fasteners

Testing Specification:

Tested to AS4396

Installation Notes:

When using 2 bolt connectors from this range, each bolt must be tightened a 1/4 to 1/2 turn alternately, until the shear head operates.

For tightening the shear head bolts, use only a 13mm AF, six sided hexagon socket (17mm AF for models
TTD431XFA, TTD451XFA & TTD551FJA models).

Read less...

To contact Sicame Australia about Insulation Piercing Connector | TTD Series | TTD151XFA use Get a quote.