Kevrek Pole Grab
Kevrek - Pole Grab
Kevrek Pole Grab
Originally designed and manufactured for the repair and maintenance on the network of Power poles, the need for the Kevrek Pole Grab has expanded over the years and is now widely used around Western Australia by a variety of Companies.
Manufactured from high tensile alloy steel, the Pole grab will clamp around and support a vertical pole whilst work is carried out on overhead wires. The Pole Grab mounts to the boom of a specially modified Kevrek 1000SG which has a unique hydraulic hose tracking system on the side of the boom extending them out to 3 meters.
With the Pole Grab removed, the 1000SG can be operated as a normal loading crane.
Standard Features
- 990/1250kg Lifting Capacity at 1.2m (with grab removed)
- 4 Metre Full Extension
- Emergency Stop
- Operator Safety Zone
- Hose Burst Protection
- Valve Control Hand Guard
- Load Indicator
Pole Grab Features
- Energy Chain System for Hydraulic Hoses
- Stainless Lift & Grab Cylinder Rods
- Leg Cut out Switch
- Hose Spiral Wrap
- Pole Grab Complete
Options
- Hydraulic stabiliser leg
- Manual swing up stabiliser leg
- 2,3,4,5 or 6 function pendant
- Fully Proportional Radio remote control
To contact Kevrek Australia about Kevrek Pole Grab use Get a quote.
Originally designed and manufactured for the repair and maintenance on the network of Power poles, the need for the Kevrek Pole Grab has expanded over the years and is now widely used around Western Australia by a variety of Companies.
Manufactured from high tensile alloy steel, the Pole grab will clamp around and support a vertical pole whilst work is carried out on overhead wires. The Pole Grab mounts to the boom of a specially modified Kevrek 1000SG which has a unique hydraulic hose tracking system on the side of the boom extending them out to 3 meters.
With the Pole Grab removed, the 1000SG can be operated as a normal loading crane.
Standard Features
- 990/1250kg Lifting Capacity at 1.2m (with grab removed)
- 4 Metre Full Extension
- Emergency Stop
- Operator Safety Zone
- Hose Burst Protection
- Valve Control Hand Guard
- Load Indicator
Pole Grab Features
- Energy Chain System for Hydraulic Hoses
- Stainless Lift & Grab Cylinder Rods
- Leg Cut out Switch
- Hose Spiral Wrap
- Pole Grab Complete
Options
- Hydraulic stabiliser leg
- Manual swing up stabiliser leg
- 2,3,4,5 or 6 function pendant
- Fully Proportional Radio remote control
To contact Kevrek Australia about Kevrek Pole Grab use Get a quote.
The Kevrek Pole Grab is an attachment made from high-tensile alloy steel for lifting and supporting vertical poles during work. It clamps around a pole so crews can carry out work on overhead wires while the pole remains supported. Companies across Western Australia use it for power-pole repair and maintenance on their local power-pole networks.
- Energy chain system for hydraulic hoses
- Stainless steel rods on the lift and grab cylinders
- Leg cut-out switch
- Hydraulic hose spiral wrap
- Optional hydraulic or manual swing-up stabiliser leg
Source: listing by Kevrek Australia on IndustrySearch · Updated 2 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Kevrek Australia on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales