Komatsu Electric Rope Shovels 90.7 mt ...

Komatsu - Electric Rope Shovels 90.7 mt Payload | P&H 4100C Boss

Supplier: Komatsu Australia

Electric Rope Shovels 90.7 mt Payload | P&H 4100C Boss

The 4100C BOSS, with 3505 mm (138 in.) wide crawler shoes, is specifically designed for operations that require low ground-bearing pressure and high digging forces.

Optimized dipper geometry

33 Recent Views

This shovel, available in both AC and DC versions, is designed specifically for the unique and demanding conditions in oil sand operations.

Nominal payload of 90.7 mt (100 st)
Nominal dipper capacity of 44.3 m³ (58.0 yd³)
Ideal for loading 172 to 363 mt (190 to 400 st) haul trucks
Large crawler shoes for low ground-bearing pressure environments
Unique machine attachment and counterweight geometry tailored for oil sand conditions
Proven, consistent high machine availability of at least 90%
Optimized dipper geometry for increased fill factors

Specifications

Working Ranges

Height of cut	16.9 m	55 ft. 4 in.
Radius of cut	24.7 m	80 ft. 11 in.
Dumping height (door open)*	9.5 m	31 ft. 0 in.
Floor level radius	16.3 m	53 ft. 5 in.
Tail swing radius	11.6 m	38 ft. 0 in.
Operator eye level	9.8 m	32 ft. 3 in.

*Height shown with bail-type dipper. Heights will be greater with bail-less or compact-bail dippers. Actual dumping height can be greater than door clearance height.

Capacity

Nominal payload*	90.7 mt	100 st
Nominal dipper capacity SAE struck SAE 2:1	44.3 m³ 48.4 m³	58.0 yd³ 63.0 yd³
Rated suspended load	161.0 mt	178 st
Optimum truck size	172 to 363 mt	190 to 400 st

*Payload and dipper capacity are dependent on many factors. Contact us for an analysis of your specific application.

Overall Dimensions

Width	14.0 m	45 ft. 10 in.
Length	17.2 m	56 ft. 5 in.
Height over gantry	13.4 m	43 ft. 10 in.
Width of crawler shoes	3,505 mm	138 in.
Width of crawlers (138")	12.8 m	41 ft. 11 in.
Length of crawlers	11.6 m	38 ft. 0 in.
Ground clearance	1.1 m	3 ft. 6 in.
Height: ground to bottom of counterweight slabs	2.8 m	9 ft. 1 in.

Technology

Centurion electrical control system

The Centurion electrical control system provides superior performance, monitoring, and data integration capabilities.

The supervisory controller, with direct integrated communication with the motor drives, allows precise motor control and fast cycle times. Real-time multi-tasking capability means optimal machine logic sequencing, monitoring, and control.

The I/O system uses the Profibus communication protocol for seamless integration of all shovel subsystems. Low-voltage 23V DC I/O drop points feature open- and short-circuit detection for improved diagnostics and troubleshooting.

The graphical user interface features intuitive, icon-based screens that display vital information, including shovel status, troubleshooting information, and optional production monitoring data and operator feedback.

PreVail remote health management system

The PreVail remote health management (RHM) system provides timely and efficient machine health and performance data. The PreVail RHM system taps into the powerful communication, command, and control capabilities of the shovel's electrical control system, transforming the data into valuable knowledge, including KPI (key performance indicator) dashboards, graphical analysis tools, predictive modelling, and reporting tools.

When you activate PreVail RHM on your 2300XPC shovel, you have access to:

Increased asset performance visibility to help you determine when to intervene, minimizing corrective action costs
Valuable risk management tools that help reduce troubleshooting time and mean time to recovery
Key performance indicator (KPI) benchmarking that makes performance gaps more visible and allow you to set in motion corrective measures to maximize productivity
Operating practices analysis that allows you to review and correct operators that are not following best practices for optimal productivity

The initial subscription period of one year is included free; after one year, subscription fees apply.

Advanced control technology

Advanced control technologies include the following:

Temperature monitoring system for all DC motors, drum shaft bearings, and shipper shaft bearings
Drive programming and analysis software
Control logic software
I/O device monitoring and fault detection
Remote health management
Extended speed range in hoist and crowd
Automatic Boom Soft Setdown (ABSS) and Boom Profile Protection Envelope to help prevent excessive loading to the attachment during operation
Anti-swing-in-bank system to reduce excessive side loading on handle and attachment
Hoist, crowd, and retract limits
Automatic lubrication and compressed air systems control

Upgrades

LED Lighting Package
- Complete high efficiency LED lighting available for internal, external, and emergency lighting.
Fleeting sheave hoist rope guide
- Includes dual steel sheaves which channel and maintain contact with the hoist ropes as they travel between the hoist drum and boom point sheaves, decreasing rope wear and improving hoist rope life.
Cold weather equipment
- Optional extra heaters and insulation protect both your operator and the shovel in temperatures that reach -40°C.
Universal shovel interface system
- Theuniversal shovel interface allows your shovels to send and receive data with any mine management system, including Modular^TM, Jigsaw^TM, and Wenco^TM systems.

On the shovel side

The Centurion electronic control receives information, such as the following, from the mine management system:

Haul truck information, including capacity, truck model and ID, and material code
Delay codes
GPS location of the shovel

On the mine management side

The mine management system receives information, such as the following, from the shovel:

Shovel faults
Propel start/stop times
Payload data, including cycle times and payloads

This information sharing means reduced operation costs, improved production data, and key performance indicator tracking.

Track Shield collision detection and mitigation system

Developed with extensive shovel operator input, Track Shield is the only automated operator-assist technology on an electric rope shovel that detects and helps prevent a dipper from striking the crawler.

Payload 2

Help your shovel operators hit the truck’s target load range every time with Payload 2.

Maximize truck load without overfilling
Reduce shovel and truck structural damage and maintenance caused by overloads
Reduce risk of dangerous, costly spillage on haul roads
Save production time with automatic calibration
Get all onboard information on one integrated GUI screen

Diverter Test Panel

The diverter test panel is designed to allow a tester to remotely test the electrical operation of the diverter circuit on board a DC shovel. Key diverter circuit components are housed in the panel which is located within the machinery house, outside the converter cabinet itself. By allowing the tester to perform all testing from a safe location, away from the potential high voltage hazards that exist inside the converter cabinet, the risk of arc flash or electrocution is minimized.

Online Vibration Monitoring

Online Vibration Monitor 2 provides predictive diagnostics on shovel motion mechanical components to hep minimize downtime. This permanently installed predictive diagnostic tool and service helps detect early stage defects in motors, bearings and transmissions prior to catastrophic failure.

Limit lost production from unplanned shutdowns by identifying components nearing end-of-life or experiencing premature defects
Monitor while producing: Operational mode records, validates and uploads data during normal production with no operator input needed
Proprietary data selection algorithm records only good, valid data
Analysis provided by a live expert with OEM knowledge
View your data from your internet-connected device using the Remote Health Monitor interface
More than one million data points from across the fleet are available to Komatsu analysts for comparison
With the hardware-as-a-service (HaaS) option, you no longer need to worry about owning the hardware or purchasing hardware upgrades.

To contact Komatsu Australia about Komatsu Electric Rope Shovels 90.7 mt Payload | P&H 4100C Boss use Get a quote.

This shovel, available in both AC and DC versions, is designed specifically for the unique and demanding conditions in oil sand operations.

Nominal payload of 90.7 mt (100 st)
Nominal dipper capacity of 44.3 m³ (58.0 yd³)
Ideal for loading 172 to 363 mt (190 to 400 st) haul trucks
Large crawler shoes for low ground-bearing pressure environments
Unique machine attachment and counterweight geometry tailored for oil sand conditions
Proven, consistent high machine availability of at least 90%
Optimized dipper geometry for increased fill factors

Specifications

Working Ranges

Height of cut	16.9 m	55 ft. 4 in.
Radius of cut	24.7 m	80 ft. 11 in.
Dumping height (door open)*	9.5 m	31 ft. 0 in.
Floor level radius	16.3 m	53 ft. 5 in.
Tail swing radius	11.6 m	38 ft. 0 in.
Operator eye level	9.8 m	32 ft. 3 in.

*Height shown with bail-type dipper. Heights will be greater with bail-less or compact-bail dippers. Actual dumping height can be greater than door clearance height.

Capacity

Nominal payload*	90.7 mt	100 st
Nominal dipper capacity SAE struck SAE 2:1	44.3 m³ 48.4 m³	58.0 yd³ 63.0 yd³
Rated suspended load	161.0 mt	178 st
Optimum truck size	172 to 363 mt	190 to 400 st

*Payload and dipper capacity are dependent on many factors. Contact us for an analysis of your specific application.

Overall Dimensions

Width	14.0 m	45 ft. 10 in.
Length	17.2 m	56 ft. 5 in.
Height over gantry	13.4 m	43 ft. 10 in.
Width of crawler shoes	3,505 mm	138 in.
Width of crawlers (138")	12.8 m	41 ft. 11 in.
Length of crawlers	11.6 m	38 ft. 0 in.
Ground clearance	1.1 m	3 ft. 6 in.
Height: ground to bottom of counterweight slabs	2.8 m	9 ft. 1 in.

Technology

Centurion electrical control system

The Centurion electrical control system provides superior performance, monitoring, and data integration capabilities.

PreVail remote health management system

When you activate PreVail RHM on your 2300XPC shovel, you have access to:

Increased asset performance visibility to help you determine when to intervene, minimizing corrective action costs
Valuable risk management tools that help reduce troubleshooting time and mean time to recovery
Key performance indicator (KPI) benchmarking that makes performance gaps more visible and allow you to set in motion corrective measures to maximize productivity
Operating practices analysis that allows you to review and correct operators that are not following best practices for optimal productivity

The initial subscription period of one year is included free; after one year, subscription fees apply.

Advanced control technology

Advanced control technologies include the following:

Temperature monitoring system for all DC motors, drum shaft bearings, and shipper shaft bearings
Drive programming and analysis software
Control logic software
I/O device monitoring and fault detection
Remote health management
Extended speed range in hoist and crowd
Automatic Boom Soft Setdown (ABSS) and Boom Profile Protection Envelope to help prevent excessive loading to the attachment during operation
Anti-swing-in-bank system to reduce excessive side loading on handle and attachment
Hoist, crowd, and retract limits
Automatic lubrication and compressed air systems control

Upgrades

LED Lighting Package
- Complete high efficiency LED lighting available for internal, external, and emergency lighting.
Fleeting sheave hoist rope guide
- Includes dual steel sheaves which channel and maintain contact with the hoist ropes as they travel between the hoist drum and boom point sheaves, decreasing rope wear and improving hoist rope life.
Cold weather equipment
- Optional extra heaters and insulation protect both your operator and the shovel in temperatures that reach -40°C.
Universal shovel interface system
- Theuniversal shovel interface allows your shovels to send and receive data with any mine management system, including Modular^TM, Jigsaw^TM, and Wenco^TM systems.

On the shovel side

The Centurion electronic control receives information, such as the following, from the mine management system:

Haul truck information, including capacity, truck model and ID, and material code
Delay codes
GPS location of the shovel

On the mine management side

The mine management system receives information, such as the following, from the shovel:

Shovel faults
Propel start/stop times
Payload data, including cycle times and payloads

This information sharing means reduced operation costs, improved production data, and key performance indicator tracking.

Track Shield collision detection and mitigation system

Payload 2

Help your shovel operators hit the truck’s target load range every time with Payload 2.

Maximize truck load without overfilling
Reduce shovel and truck structural damage and maintenance caused by overloads
Reduce risk of dangerous, costly spillage on haul roads
Save production time with automatic calibration
Get all onboard information on one integrated GUI screen

Diverter Test Panel

Online Vibration Monitoring

Limit lost production from unplanned shutdowns by identifying components nearing end-of-life or experiencing premature defects
Monitor while producing: Operational mode records, validates and uploads data during normal production with no operator input needed
Proprietary data selection algorithm records only good, valid data
Analysis provided by a live expert with OEM knowledge
View your data from your internet-connected device using the Remote Health Monitor interface
More than one million data points from across the fleet are available to Komatsu analysts for comparison
With the hardware-as-a-service (HaaS) option, you no longer need to worry about owning the hardware or purchasing hardware upgrades.

Read less...

To contact Komatsu Australia about Komatsu Electric Rope Shovels 90.7 mt Payload | P&H 4100C Boss use Get a quote.

4100c-boss-brochure(1.19MB)

AI Overview BETA

The Komatsu P&H 4100C BOSS is an electric rope shovel for loading haul trucks, with a nominal payload of 90.7 mt. Track Shield is an operator-assist system that detects and helps prevent the dipper from striking a crawler during operation. Oil sand mining operations are the intended setting, with crawler shoes designed for conditions requiring low ground-bearing pressure.

Centurion control links motor drives directly for precise control and fast cycle times
Payload 2 helps shovel operators hit truck target loads without overfilling
Available in both AC and DC versions
Nominal dipper capacity: 44.3 m³ SAE struck; 48.4 m³ SAE 2:1
Optimum truck size: 172 to 363 mt

Source: listing by Komatsu Australia on IndustrySearch · Updated 27 Oct 2026
Supplier document: 4100c-boss-brochure (PDF)

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Komatsu Australia provide you with a quote