Leda Thicknessers | 15" 1-phase

Leda - Thicknessers | 15" 1-phase Price Guide: $3,498

Supplier: Specialised Joinery Supplies

Thicknessers | 15" 1-phase

Thicknesser | Spiral 15" Single PH

In Stock

Specifications

381mm (15”) maximum working width.
165mm (6.5”) maximum working height.
Driven serrated steel infeed roller in front of cutterhead.
Driven smooth outfeed roller behind cutterhead with rubber surface.
Anti-kick back device at infeed position.
Two idle rollers in ground cast iron work table, directly below two driven feed rollers above.
Two support rollers on front of work table and two at rear.
Handwheel rise and fall of top section of machine on four round threaded columns, driven by chain below work table.
Locking knob to hold table at required height.
Measurement scale and pointer to set table height.
Dust extraction chute on rear of machine of 100mm diameter.
Push button switch with protruding stop button.

Technical Data

Width of work table 381 mm
Length of working table 653 mm
Maximum depth of cut in one pass 3 mm
Minimum length of unbutted workpiece 170 mm
Two feed speeds by gear change 5 or 9 metres/min
Cutterhead diameter 75 mm
Rotation speed of cutterhead 5000 rpm
Cutterhead and feed drive motor Single Phase 3hp
Nett weight of machine 210 kgs

To contact Specialised Joinery Supplies about Leda Thicknessers | 15" 1-phase use Get a quote.

Specifications

381mm (15”) maximum working width.
165mm (6.5”) maximum working height.
Driven serrated steel infeed roller in front of cutterhead.
Driven smooth outfeed roller behind cutterhead with rubber surface.
Anti-kick back device at infeed position.
Two idle rollers in ground cast iron work table, directly below two driven feed rollers above.
Two support rollers on front of work table and two at rear.
Handwheel rise and fall of top section of machine on four round threaded columns, driven by chain below work table.
Locking knob to hold table at required height.
Measurement scale and pointer to set table height.
Dust extraction chute on rear of machine of 100mm diameter.
Push button switch with protruding stop button.

Technical Data

Width of work table 381 mm
Length of working table 653 mm
Maximum depth of cut in one pass 3 mm
Minimum length of unbutted workpiece 170 mm
Two feed speeds by gear change 5 or 9 metres/min
Cutterhead diameter 75 mm
Rotation speed of cutterhead 5000 rpm
Cutterhead and feed drive motor Single Phase 3hp
Nett weight of machine 210 kgs

Read less...

To contact Specialised Joinery Supplies about Leda Thicknessers | 15" 1-phase use Get a quote.

AI Overview BETA

Leda’s 15-inch single-phase thicknesser planes boards to reduce their thickness. An anti-kickback device at the infeed helps prevent workpieces from moving back toward the operator. Woodworking and joinery users set the top section’s height with a handwheel, then read the setting on the measurement scale and pointer to choose their desired thickness for each board.

Maximum working width: 381 mm
Maximum depth of cut per pass: 3 mm
Two gear-selected feed speeds: 5 or 9 metres/min
Cutterhead rotates at 5,000 rpm; diameter is 75 mm
Net machine weight: 210 kg

Source: listing by Specialised Joinery Supplies on IndustrySearch · Updated 31 Oct 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Specialised Joinery Supplies provide you with a quote