Lift Up Floor Locks | Hammerlock

Hammerlock Lift Up Floor Locks 900-2 or 900-4

• Effectively stop movement by lifting one end of the wheeled equipment from the ground
• Simple pedal on, pedal off mechanism ensures trouble-free operation
• A single floor lock is installed between the swivel castors at the operating (push) end of the trolley

Hammerlock Friction Pad Floor Locks 909-100

Friction pad style is preferred where greater loads must be carried, or the greatest stability is needed

Simple pedal-on, pedal-off operation

• Does NOT lift the trolley, but pushes a spring loaded rubber pad onto the floor.
• Five millimeters of compression gives approx 40kg of push on to the 80mm diameter base.
• This is enough to lock most trolleys. If insufficient, a second lock can be mounted at the other end of the trolley
• The load capacities given assume industrial strength castors
•  Do not use on work benches, ladders or on sloped floors
• 909-125 & 909-150 Models also Available

TRL-HD Heavy duty Hammerlock Floor Lock with friction pad for greater load stability

• Cast iron construction
• Simple pedal-on, pedal-off operation
• Use two truck locks when four swivelling castors are fitted - mount at each end between castors
• Thick elastic rubber friction pad provides firm grip
  Holds trolley firmly in position without lifting
  Moderate - smooth operating force
  Suitable for work platforms, servicing stands, heavy trolleys, mobile machinery, work benches & cradles.