Lightpaths Optical Fibre Ducting System for sale from Warren & Brown Technologies

Lightpaths Optical Fibre Ducting System

Lightpaths Optical Fibre Ducting system is an effective and economical ducting system that has been designed to ensure network integrity.

It is a simple to assemble, flexible system that provides protection from mechanical damage due to external causes. It also provides stress relief for optical fibre, by ensuring that a minimum 30 mm bending radius is maintained at all times.

There are often existing Optical Fibre installations of varying standard s; which can be unsatisfactory for the following reasons:

They cause excessive bending,
They have no stress relief,
They are too expensive to maintain,
They are difficult to install or,
They do not allow for easy expansion.

Lightpaths ducting is available in six standard sizes. i.e. 300mm, 220 mm, 100mm, 100 x 50mm, 50mm and 30mm wide; which can be interconnected by standard adapto rs. There are many components available in each of these size ranges. Such as: straight duct, tee pieces, elbows, reducing adaptors etc.

All individual components have lids to ensure complete cable protection. The system allows fibre routing at custom points in duct lengths, via a cut and joint tech nique, or a simple notching system that provides a standard entry or exit point for drop off components.

These include right angle bends and flexible tubes; which enable protected access to multiple optic fibre transmission systems within a rack. Horizontal fibre systems are usually constructed with 300mm, 220mm and 1 00mm duct. Where limited overhead height exists for installing duct systems, then 1 00mm x 50mm duct can be used.

Vertical feeds, such as drop-offs, to equipment racks are g enerally made up with 50 and 30mm duct sections.

More information >>

To contact Warren & Brown Technologies about Lightpaths Optical Fibre Ducting System use Get a quote.

There are often existing Optical Fibre installations of varying standard s; which can be unsatisfactory for the following reasons:

They cause excessive bending,
They have no stress relief,
They are too expensive to maintain,
They are difficult to install or,
They do not allow for easy expansion.

Vertical feeds, such as drop-offs, to equipment racks are g enerally made up with 50 and 30mm duct sections.

More information >>

Read less...

To contact Warren & Brown Technologies about Lightpaths Optical Fibre Ducting System use Get a quote.

AI Overview BETA

Lightpaths Optical Fibre Ducting System is a simple-to-assemble modular ducting system for cable routing and protection from external mechanical damage. It maintains a minimum 30 mm bending radius at all times, relieving stress on the cable. Equipment racks containing multiple transmission systems suit it, as right-angle bends and flexible tubes allow protected access inside the rack.