LPG Fire Aus | Fire Suppression System | ...

LPG Fire Aus | Fire Suppression System | INERT GAS IFLOW

Supplier: LPG Fire Australia

Using innovative iFLOW delivery technology, the INERGEN® (IG541) and IG55 300BAR iFLOW Clean Agent Fire Suppression System provides a regulated agent discharge into the protected hazard area.

Video for LPG Fire Aus | Fire Suppression System | INERT GAS IFLOW

87 Recent Views Call for more details

Inert gas agents (IG541 and IG55) are composed of naturally-occurring gases found in the air we breathe. IG541 and IG55 are nontoxic, do not produce corrosive decomposition products when exposed to fire and are designed to protect valuable or sensitive assets that could be damaged by conventional agents. When discharged, they will not produce a fog, so escape routes will remain visible. And in the aftermath of an incident, the agent simply returns to the atmosphere in its natural state causing no environmental impact.

During a typical inert gas system discharge, peak pressure and flow spikes occur. It is these peaks that are used to determine the pipe size specification and venting requirements.

The iFLOW system reduces pressure spikes in the distribution pipe network during discharge. This allows for the use of smaller diameter, lower pressure-rated piping and reduced pressure relief venting requirements. An enhancement to the proven agent technology, the innovative iFLOW technology is based on three main elements:

The iFLOW valve reduces the peak pressure and regulates the flow at a nominal pressure of 60 bar (870 psi) in the 300 bar (4350 psi) system while maintaining the ability to achieve 95% of the system design concentration within 60 or 120 seconds.
The iFLOW horizontal check valve minimizes installation time by facilitating the interconnection of containers and, in many cases, eliminates the need for a discharge manifold.
The iFLOW matrix system offers design flexibility and adaptation to complex architectural spaces. When compared with traditional racking, the matrix system allows storage containers to be positioned in traditional rows or around objects providing more flexibility during installation and quicker removal of containers from the bank during recharge and maintenance.

The iFLOW INERGEN® (IG541) and IG55 systems are VdS approved and Activfire Listed.

To contact LPG Fire Australia about LPG Fire Aus | Fire Suppression System | INERT GAS IFLOW use Get a quote.

During a typical inert gas system discharge, peak pressure and flow spikes occur. It is these peaks that are used to determine the pipe size specification and venting requirements.

The iFLOW valve reduces the peak pressure and regulates the flow at a nominal pressure of 60 bar (870 psi) in the 300 bar (4350 psi) system while maintaining the ability to achieve 95% of the system design concentration within 60 or 120 seconds.
The iFLOW horizontal check valve minimizes installation time by facilitating the interconnection of containers and, in many cases, eliminates the need for a discharge manifold.
The iFLOW matrix system offers design flexibility and adaptation to complex architectural spaces. When compared with traditional racking, the matrix system allows storage containers to be positioned in traditional rows or around objects providing more flexibility during installation and quicker removal of containers from the bank during recharge and maintenance.

The iFLOW INERGEN® (IG541) and IG55 systems are VdS approved and Activfire Listed.

Read less...

To contact LPG Fire Australia about LPG Fire Aus | Fire Suppression System | INERT GAS IFLOW use Get a quote.