Maloney Casing Insulators | 90

Maloney - Casing Insulators | 90

Casing Insulators | 90

Model 90 Casing Insulators are manufactured from virgin high density polyethylene (HDPE Type II).

In Stock

Features of this product

Insulators are molded in two sections, designed for simplified field installation, and use threaded inserts requiring only a screwdriver for assembly.
A rubberized liner is factory-installed to prevent slippage between the insulator and the pipe.
All hardware is stainless steel to resist corrosion.
The Insulators exhibit low friction and the high abrasion resistance allowing carrier pipes to be more easily pulled through the casing.
The Model 90 is specifically designed to raise the belled portion of cast iron and PVC pipe above the inside surface of the casing pipe.
In the event of a nonstandard configuration, molded “cutting guides” on the sides of each fin permit easy manually trimming fins to a uniform height.

To contact Tremco Pipeline Equipment about Maloney Casing Insulators | 90 use Get a quote.

Features of this product

Insulators are molded in two sections, designed for simplified field installation, and use threaded inserts requiring only a screwdriver for assembly.
A rubberized liner is factory-installed to prevent slippage between the insulator and the pipe.
All hardware is stainless steel to resist corrosion.
The Insulators exhibit low friction and the high abrasion resistance allowing carrier pipes to be more easily pulled through the casing.
The Model 90 is specifically designed to raise the belled portion of cast iron and PVC pipe above the inside surface of the casing pipe.
In the event of a nonstandard configuration, molded “cutting guides” on the sides of each fin permit easy manually trimming fins to a uniform height.

To contact Tremco Pipeline Equipment about Maloney Casing Insulators | 90 use Get a quote.