Maxon - Intelimax+ 4G M2M CAT1 Serial Modem | MA-2020-4G

The Intelimax+4G is engineered especially to withstand Australia’s vast climate and environmental conditions. Employing an ARM processor, with batter-backed RTC, the Intelimax+4G has a full feature set. This includes extensive event recording, connection management, fault recovery, security features, and remote firmware upgradability. All of which assist in creating a highly reliable communications gateway. Enhanced capabilities also include remote AT Commands, SNMPv3, SSH, Telnet, remote management, on-board IP stack and FTP. This multi-purpose device mounts perfectly in control boxes and alongside other equipment. The Intelimax+4G is suitable for 4G LTE networks and provides a comprehensive range of features that will suit your telemetry requirements.

Intelimax+ 4G M2M CAT1 Serial Modem MA-2020-4G KIT Features:

• FDD-LTE CAT1, supports Band 28
• RS232/RS485 Interface (RJ45 Connector)
• Supports Packet and Circuit Data, 2 way SMS
• Supports Modem Emulation & AT over IP
• Inbuilt FTP client & PPP server
• Remote configurable and FOTA
• Wide input voltage range (7.5-48VDC)
• Windows GUI for fast configuration and updates

Kit includes:

• 1 x Intelimax Modem (MA-2020-4G)
• 1 x SMA Antenna (ANT-LTE-SMA)
• 1 x Serial Cable (CAB-RJ45-DB9)
• 2 x Mounting Brackets (SP-5615)

To contact RFI Technology Solutions about Maxon Intelimax+ 4G M2M CAT1 Serial Modem | MA-2020-4G use Get a quote.

The Intelimax+4G is engineered especially to withstand Australia’s vast climate and environmental conditions. Employing an ARM processor, with batter-backed RTC, the Intelimax+4G has a full feature set. This includes extensive event recording, connection management, fault recovery, security features, and remote firmware upgradability. All of which assist in creating a highly reliable communications gateway. Enhanced capabilities also include remote AT Commands, SNMPv3, SSH, Telnet, remote management, on-board IP stack and FTP. This multi-purpose device mounts perfectly in control boxes and alongside other equipment. The Intelimax+4G is suitable for 4G LTE networks and provides a comprehensive range of features that will suit your telemetry requirements.

Intelimax+ 4G M2M CAT1 Serial Modem MA-2020-4G KIT Features:

• FDD-LTE CAT1, supports Band 28
• RS232/RS485 Interface (RJ45 Connector)
• Supports Packet and Circuit Data, 2 way SMS
• Supports Modem Emulation & AT over IP
• Inbuilt FTP client & PPP server
• Remote configurable and FOTA
• Wide input voltage range (7.5-48VDC)
• Windows GUI for fast configuration and updates

Kit includes:

• 1 x Intelimax Modem (MA-2020-4G)
• 1 x SMA Antenna (ANT-LTE-SMA)
• 1 x Serial Cable (CAB-RJ45-DB9)
• 2 x Mounting Brackets (SP-5615)

Read less...

To contact RFI Technology Solutions about Maxon Intelimax+ 4G M2M CAT1 Serial Modem | MA-2020-4G use Get a quote.