Mazak 5 Axis CNC Machine | UD-400/5X

All Products > Metalworking & Machining > 5 Axis CNC Machine

Mazak - 5 Axis CNC Machine | UD-400/5X

Supplier: John Hart
Mazak - 5 Axis CNC Machine | UD-400/5X
5 Axis CNC Machine | UD-400/5X
Mazak - 5 Axis CNC Machine | UD-400/5X

High speed, high accuracy 5-axis machining center for micro precision machining

Description
In Stock

Product Features: 

  • Vibration is minimized during high speed operation by the rigid base and column and their high damping capability
  • The symmetrical design of the double column construction minimizes heat displacement
  • High speed 45000rpm spindle for higher productivity
  • The high speed main spindle motor with its integral spindle/motor design the direct drive motors used for the rotary axes do not use any gears or belts for the drive systems to minimize vibration and to realize high speed response
  • The spindle and ball screw core cooling systems minimize heat generation during operation and the thermal shield accurately and automatically compensates for changes in the room temperature

Product Specifications: 

Capacity
 Maximum Workpiece Diameter
400 mm / 15.750 in
Maximum Workpiece Height
300 mm / 11.810 in
Spindle Spindle Taper HSK-E40
Magazine Number of Tools 40
Rotary Axes
 Spindle Tilt (B axis) 150 degrees
Table Indexing (C axis) 360.0000 degrees
Feed Axes
 Travel (X Axis) 550 mm / 21.65 in
Travel (Y Axis) 400 mm / 15.75 in
Travel (Z Axis) 350 mm / 13.78 in

Read more...

To contact John Hart about Mazak 5 Axis CNC Machine | UD-400/5X use Get a quote.

Product Features: 

  • Vibration is minimized during high speed operation by the rigid base and column and their high damping capability
  • The symmetrical design of the double column construction minimizes heat displacement
  • High speed 45000rpm spindle for higher productivity
  • The high speed main spindle motor with its integral spindle/motor design the direct drive motors used for the rotary axes do not use any gears or belts for the drive systems to minimize vibration and to realize high speed response
  • The spindle and ball screw core cooling systems minimize heat generation during operation and the thermal shield accurately and automatically compensates for changes in the room temperature

Product Specifications: 

Capacity
 Maximum Workpiece Diameter
400 mm / 15.750 in
Maximum Workpiece Height
300 mm / 11.810 in
Spindle Spindle Taper HSK-E40
Magazine Number of Tools 40
Rotary Axes
 Spindle Tilt (B axis) 150 degrees
Table Indexing (C axis) 360.0000 degrees
Feed Axes
 Travel (X Axis) 550 mm / 21.65 in
Travel (Y Axis) 400 mm / 15.75 in
Travel (Z Axis) 350 mm / 13.78 in

Read less...

To contact John Hart about Mazak 5 Axis CNC Machine | UD-400/5X use Get a quote.

Credit score not impacted
How much do you need?
Just an estimate is fine.
Weekly repayments (rates from 6.85% p.a)
Calculating...
Enquire about this product & finance options.
Disclaimer

* This weekly repayment estimate is provided by EasyAsset Group Pty Ltd (ABN 20 079 858 236). EasyAsset is a finance broker.

This estimate is based on a hypothetical loan amount of $175,000, using an estimated value for 5 Axis CNC Machine assets commonly financed in Australia.

This repayment is calculated with an interest rate of 6.85% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The asset price (if shown) may be an estimate and not include other additional costs such as installation, delivery, etc.

In order to provide this estimate, EasyAsset is required to make several eligibility assumptions, including employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with an above average credit score and an LVR not exceeding 120%.

This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.

A quote, details of all fees and charges may be obtained by contacting EasyAsset via easyasset.com.au or calling 1300 788 373.

Get a quote
Let John Hart provide you with a quote
Supplier
Supplier: John Hart
Distribution: Australia, New Zealand, Worldwide
Location: Clayton, VIC
Credit score not impacted
How much do you need?
Just an estimate is fine.
Weekly repayments (rates from 6.85% p.a)
Calculating...
Enquire about this product & finance options.
Disclaimer

* This weekly repayment estimate is provided by EasyAsset Group Pty Ltd (ABN 20 079 858 236). EasyAsset is a finance broker.

This estimate is based on a hypothetical loan amount of $175,000, using an estimated value for 5 Axis CNC Machine assets commonly financed in Australia.

This repayment is calculated with an interest rate of 6.85% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The asset price (if shown) may be an estimate and not include other additional costs such as installation, delivery, etc.

In order to provide this estimate, EasyAsset is required to make several eligibility assumptions, including employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with an above average credit score and an LVR not exceeding 120%.

This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.

A quote, details of all fees and charges may be obtained by contacting EasyAsset via easyasset.com.au or calling 1300 788 373.

Is this your product? Manage products / company details |
Report this product
More from this supplier
See all 9 items
CNC Turning Centre | Quick Turn 200MS

CNC Turning Centre | Quick Turn 200MS

 Vertical Machining Centre | FJV 5 Face-100/120

Vertical Machining Centre | FJV 5 Face-100/120

 5 Axis CNC Machine | UD-400/5X

5 Axis CNC Machine | UD-400/5X

 Horizontal Machining Centres | HCN-4000

Horizontal Machining Centres | HCN-4000

 CNC Machining Centres | Integrex i-200S

CNC Machining Centres | Integrex i-200S

 CNC Machining Centres | Variaxis i-700

CNC Machining Centres | Variaxis i-700

 Industrial Robotic Arm | ARC Mate 0iB

Industrial Robotic Arm | ARC Mate 0iB

 CNC Turning Centre | Cybertech Turn 4500M

CNC Turning Centre | Cybertech Turn 4500M

 Robot Grippers | RG2

Robot Grippers | RG2
You might also like these
5 Axis CNC Machining Centres | Large Capacity

5 Axis CNC Machining Centres | Large Capacity

CNC Vertical 5 Axis Machining Centre | Hermle C42/MT

CNC Vertical 5 Axis Machining Centre | Hermle C42/MT

 CNC Vertical 5 Axes Machining Centre | VMX-42SRTi | Hurco

CNC Vertical 5 Axes Machining Centre | VMX-42SRTi | Hurco

 CNC Vertical 5 Axes Machining Centres - | HURCO VMX-60SRTi

CNC Vertical 5 Axes Machining Centres - | HURCO VMX-60SRTi

 CNC Vertical 5 axis Machining Centre | Hermle C60 MT

CNC Vertical 5 axis Machining Centre | Hermle C60 MT

 5 Axis Aluminium CNC Machining Centers | Profile-Flex

5 Axis Aluminium CNC Machining Centers | Profile-Flex

 Aluminium CNC 5 Axis Machining Center | Mega Flex

Aluminium CNC 5 Axis Machining Center | Mega Flex

 Italian NOVA Series 3 & 5 Axis CNC Machining Centres

Italian NOVA Series 3 & 5 Axis CNC Machining Centres

 5/6 Interpolated Axes | Brembana Maxima | 5 Axis CNC Machine

5/6 Interpolated Axes | Brembana Maxima | 5 Axis CNC Machine

 5/6 Interpolated Axes | Brembana G-rex | 5 Axis CNC Machine

5/6 Interpolated Axes | Brembana G-rex | 5 Axis CNC Machine

 5 Axis CNC Machining Centre | FTV 500

5 Axis CNC Machining Centre | FTV 500

 MCU-5X 5 Axis Verticle Machining Centre

MCU-5X 5 Axis Verticle Machining Centre

 5 Axis CNC Machining Machine - Mitseiki - Litz LU

5 Axis CNC Machining Machine - Mitseiki - Litz LU

 5 Axis CNC Machines I CMX 50 U

5 Axis CNC Machines I CMX 50 U

 5 Axis CNC Machines I CMX 70 U

5 Axis CNC Machines I CMX 70 U

 5 Axis CNC Machines I DMU 50

5 Axis CNC Machines I DMU 50

 5 Axis CNC Machines I NMV 3000 DCG

5 Axis CNC Machines I NMV 3000 DCG

 5 Axis CNC Machine | UGT-800

5 Axis CNC Machine | UGT-800

 5 Axis CNC Machining Centres | AX500

5 Axis CNC Machining Centres | AX500
Contact John Hart
5 Axis CNC Machine in Melbourne
5 Axis CNC Machine in Adelaide
5 Axis CNC Machine in Sydney
5 Axis CNC Machine in Darwin
5 Axis CNC Machine in Brisbane
5 Axis CNC Machine in Perth
Are you a 5 Axis CNC Machine supplier?
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales
learn more