Megabore CNC Slant Bed Lathe | 50-55-60

Megabore - CNC Slant Bed Lathe | 50-55-60

Supplier: ESP Machinery Australia

CNC Slant Bed Lathe | 50-55-60

The SB series is a heavy duty slant bed lathe. Hollow spindles available from 9 to 30 inch. Between centers from 40 - 204 inches.

In Stock

Features of this product

One piece bed, 60° slant bed construction ensures maximum stability and convenient chip disposal.
Alloy steel spindle with opposed taper roller bearings.
All gears in the headstock are hardened and precisely ground.
Automatic ranges of spindle speed through pneumatic gear shift.
Spindle speed ranges are automatically changed by M code.
Infinitely variable speed are commanded by S code.
Tool change are commanded by T code.
Auto lubrication system is equipped for headstock, carriage, and cross-slide.
Precision tapered roller bearings are equipped on the spindle and the quill.
The quill is heat treated and precisely ground.
Internal taper of quill to suit MT#6 dead center or live centre.
Turcite B anti friction material is applied on cross slide and carriage for reduce friction.
X and Z axis ballscrews are protected by covers to prevent ingress of swarf / chips and coolant.

To contact ESP Machinery Australia about Megabore CNC Slant Bed Lathe | 50-55-60 use Get a quote.

Features of this product

One piece bed, 60° slant bed construction ensures maximum stability and convenient chip disposal.
Alloy steel spindle with opposed taper roller bearings.
All gears in the headstock are hardened and precisely ground.
Automatic ranges of spindle speed through pneumatic gear shift.
Spindle speed ranges are automatically changed by M code.
Infinitely variable speed are commanded by S code.
Tool change are commanded by T code.
Auto lubrication system is equipped for headstock, carriage, and cross-slide.
Precision tapered roller bearings are equipped on the spindle and the quill.
The quill is heat treated and precisely ground.
Internal taper of quill to suit MT#6 dead center or live centre.
Turcite B anti friction material is applied on cross slide and carriage for reduce friction.
X and Z axis ballscrews are protected by covers to prevent ingress of swarf / chips and coolant.