Metalmaster Radial Drill | RAD-900 4MT
Metalmaster - Radial Drill | RAD-900 4MT
METALMASTER Radial Arm Drill RAD-900 4MT
Features of this product
- Precision Taiwanese manufactured radial drilling machines
- 4-way joystick control for motorised arm rise and fall and spindle direction forward and reverse
- 3 Speed auto down-feed: 0.05, 0.09, 0.15(mm rev)
- Coolant pump system with flexible hose
- Amp meter providing direct reading of spindle during operation
- Work light mounted underneath arm providing direct light on work piece
- Oil-bath lubricated gear drive
- Micro down feed hand wheel for quill
- Safety micro switch located at end of arm
- Wear strip on arm ensuring greater wear resistance whilst maintaining head rigidity
- Quiet and smooth operation
- For drilling, reaming and tapping
- Reliability - sold for over 20 years
- 12 months warranty
To contact Shaw Machinery about Metalmaster Radial Drill | RAD-900 4MT use Get a quote.
Features of this product
- Precision Taiwanese manufactured radial drilling machines
- 4-way joystick control for motorised arm rise and fall and spindle direction forward and reverse
- 3 Speed auto down-feed: 0.05, 0.09, 0.15(mm rev)
- Coolant pump system with flexible hose
- Amp meter providing direct reading of spindle during operation
- Work light mounted underneath arm providing direct light on work piece
- Oil-bath lubricated gear drive
- Micro down feed hand wheel for quill
- Safety micro switch located at end of arm
- Wear strip on arm ensuring greater wear resistance whilst maintaining head rigidity
- Quiet and smooth operation
- For drilling, reaming and tapping
- Reliability - sold for over 20 years
- 12 months warranty
To contact Shaw Machinery about Metalmaster Radial Drill | RAD-900 4MT use Get a quote.
The Metalmaster RAD-900 4MT is a radial arm drilling machine that drills, reams and taps workpieces. Its four-way joystick raises and lowers the motorised arm and switches spindle direction between forward and reverse, putting both controls on one joystick. Manufacturing workshops get direct illumination on the workpiece from a light mounted beneath the arm while machining.
- Three-speed automatic down-feed: 0.05, 0.09 and 0.15 mm/rev
- Coolant pump system with flexible hose
- Amp meter gives a direct spindle reading during operation
- Safety micro switch at the end of the arm
- 12-month warranty
Source: listing by Shaw Machinery on IndustrySearch · Updated 1 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Shaw Machinery on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Hydraulic Guillotines | HG 840B
Hydraulic Press | HPM150T
Mill Drill | HM-46B
Portable Magnetic Drill | HF-750 3MT
Metal Swivel Head Bandsaw | EB-351DSA
Punch and Shear Machine | IW-125S
Sheet Metal Guillotine | SG-2504E
Radial Drill | RAD-900 4MT
Universal Milling Machine | BM-63VE
Roll Forming Machine | 2450mm
Radial Arm Drill - RAD-900
Radial Arm Drill - Z3050x16
Radial Drilling Machines
Taiwanese FRD Radial Drilling Machine
Radial Drill | TF-1280H
Radial Arm Drills | TF-750S / TF-900S
Radial Arm Drills | TF-1100S
Radial Arm Drills | TF-1280H
Radial Arm Drills | TF-1300H
Radial Drilling Machine | Morgon
Radial Drill | Z30 Series
Radial Drill | VR8A
Radial Drill
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales