Metlam - Hand Dryer | HK-2400-SAR

Specifications of this product

• Casing: 1.2mm #304 Satin Stainless Steel
• Facia Panel: 2.0mm #304 Satin Stainless Steel
• Nozzle: Chrome Plated Zinc
• Motor: 200W Brush Type: Dual Ball Bearings, 5500RPM, 105°C auto reset safety overload
• Power Use: 240V, 50Hz, 2000-2400W, 10.0A
• Sound Level: 73db (+/- 3)
• Drying Time: Less than 30 seconds
• DP Rating: IPX 1
• Element: 1800-2200W
• Heater: 65°C auto reset thermostat
• Warm Air: Speed: 28m/s, Temp: Ambient +30°C
• Protection: Over Heating Fuse (replaceable)
• Timing: 60 sec power cut off, auto reset
• Sensor/Range: Auto Infrared – 180mm +/- 20mm preset, 100 – 300mm adjust
• Case Security: 4 SS theft resistant hex drive screws (hex key supplied)
• Net Weight: 9kg
• Unit Size: 320mmW x 338mmH x 178mmD
• Wall Opening: 295mmW x 313mmH x 175mmD
• Nozzle: 80mm projection

To contact Adelaide Bathroom and Kitchen Supplies about Metlam Hand Dryer | HK-2400-SAR use Get a quote.

Specifications of this product

• Casing: 1.2mm #304 Satin Stainless Steel
• Facia Panel: 2.0mm #304 Satin Stainless Steel
• Nozzle: Chrome Plated Zinc
• Motor: 200W Brush Type: Dual Ball Bearings, 5500RPM, 105°C auto reset safety overload
• Power Use: 240V, 50Hz, 2000-2400W, 10.0A
• Sound Level: 73db (+/- 3)
• Drying Time: Less than 30 seconds
• DP Rating: IPX 1
• Element: 1800-2200W
• Heater: 65°C auto reset thermostat
• Warm Air: Speed: 28m/s, Temp: Ambient +30°C
• Protection: Over Heating Fuse (replaceable)
• Timing: 60 sec power cut off, auto reset
• Sensor/Range: Auto Infrared – 180mm +/- 20mm preset, 100 – 300mm adjust
• Case Security: 4 SS theft resistant hex drive screws (hex key supplied)
• Net Weight: 9kg
• Unit Size: 320mmW x 338mmH x 178mmD
• Wall Opening: 295mmW x 313mmH x 175mmD
• Nozzle: 80mm projection

Read less...

To contact Adelaide Bathroom and Kitchen Supplies about Metlam Hand Dryer | HK-2400-SAR use Get a quote.