Millers Falls Car Rotisserie | 2040kg ...
Millers Falls - Car Rotisserie | 2040kg (4500 lb)
The Millers Falls RR4500GB 2040kg (4500lb) Hydraulic Gear Driven Car Restoration Rotisserie is a must-have for your workshop or garage when you need to restore a car body, chassis or even a boat hull.to its former glory.
Specifications of this product
- Brand: Millers Falls
- Model: RR4500GB
- Lifting Capacity: 2040kg (4500lb)
- Lifting rams: 2x 8000kg hydraulic
- Skiving resistant piston ram
- Lifting height: Adjustable to 1150mm above bottom rail
- Working length: Adjustable to in excess of 6000mm
- Working angle: Adjustable (360 degrees)
- Gear Driven
- Supporting arm working width: Adjustable
- Project balance: Adjustable
- Project center of gravity:Adjustable
- Powder coated, steel construction
- Fixed position outriggers
- Heavy duty castors
- Locking pins: Spring loaded 3mm high tensile steel
- Packing dimensions: 154cm x 75cm x 37cm
- Weight: 268kg
- 12 month Warranty
- Colour may vary
To contact Strutfit about Millers Falls Car Rotisserie | 2040kg (4500 lb) use Get a quote.
Specifications of this product
- Brand: Millers Falls
- Model: RR4500GB
- Lifting Capacity: 2040kg (4500lb)
- Lifting rams: 2x 8000kg hydraulic
- Skiving resistant piston ram
- Lifting height: Adjustable to 1150mm above bottom rail
- Working length: Adjustable to in excess of 6000mm
- Working angle: Adjustable (360 degrees)
- Gear Driven
- Supporting arm working width: Adjustable
- Project balance: Adjustable
- Project center of gravity:Adjustable
- Powder coated, steel construction
- Fixed position outriggers
- Heavy duty castors
- Locking pins: Spring loaded 3mm high tensile steel
- Packing dimensions: 154cm x 75cm x 37cm
- Weight: 268kg
- 12 month Warranty
- Colour may vary
To contact Strutfit about Millers Falls Car Rotisserie | 2040kg (4500 lb) use Get a quote.
The Millers Falls RR4500GB is a hydraulic, gear-driven car rotisserie for holding and turning restoration projects weighing up to 2,040 kg. Its working angle adjusts through 360 degrees, letting operators turn the project to reach different sides during restoration. Workshops restoring car bodies, chassis or boat hulls can adjust the supporting-arm width to suit each project.
- Two 8,000 kg hydraulic lifting rams
- Lifting height adjusts to 1,150 mm above the bottom rail
- Working length adjusts to more than 6,000 mm
- Project balance and centre of gravity are adjustable
- 12-month warranty
Source: listing by Strutfit on IndustrySearch · Updated 1 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Strutfit on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales