Mobile Column Lift | 75 H

Mobile - Column Lift | 75 H

Supplier: Stenhoj Australia

Column Lift | 75 H

Electro-hydraulic mobile lifts with 7.5 t capacity per column

In Stock

Features of this product

Protected and sturdy hydraulic cylinder, almost mainenance-free
One Master-column and several Slave-columns, operation odes all or single
Operation from each column possible
Maximum work safety through double load protection in every height, meaning mechanical safety ratchets and hydrauliclocking valves
Cycle control with hydraulic way valves for exact and automatic synchronization ± 2 mm
Mechanical travelling device on each post, with two wheels in front and rear wheel handle, spring lowers to the ground when loaded and raises the column to make it movable when unloaded
High ease of use through good movability, easy operation, low setup time and fast lifting time
Adjustable forks, no adaptors needed
Circuit cable connection around the vehicle: 10 m cable length each post and 10 m cable length for main power supply

Specifications of this product

Lifting capacity, up to 7,500 kg
Stroke length 1,700 mm
Working height 1,800 mm
Lifting / lowering time 115 / 90 (WB) sec.
Pump unit 1,1 / 2,2 (WB) kW per column
Voltage H: 3x230/400V - 50 Hz - 25/16 A HWB: 115/230 V AC, 50/60 Hz, 3 A
Operation hydraulic

To contact Stenhoj Australia about Mobile Column Lift | 75 H use Get a quote.

Features of this product

Protected and sturdy hydraulic cylinder, almost mainenance-free
One Master-column and several Slave-columns, operation odes all or single
Operation from each column possible
Maximum work safety through double load protection in every height, meaning mechanical safety ratchets and hydrauliclocking valves
Cycle control with hydraulic way valves for exact and automatic synchronization ± 2 mm
Mechanical travelling device on each post, with two wheels in front and rear wheel handle, spring lowers to the ground when loaded and raises the column to make it movable when unloaded
High ease of use through good movability, easy operation, low setup time and fast lifting time
Adjustable forks, no adaptors needed
Circuit cable connection around the vehicle: 10 m cable length each post and 10 m cable length for main power supply

Specifications of this product

Lifting capacity, up to 7,500 kg
Stroke length 1,700 mm
Working height 1,800 mm
Lifting / lowering time 115 / 90 (WB) sec.
Pump unit 1,1 / 2,2 (WB) kW per column
Voltage H: 3x230/400V - 50 Hz - 25/16 A HWB: 115/230 V AC, 50/60 Hz, 3 A
Operation hydraulic

Read less...

To contact Stenhoj Australia about Mobile Column Lift | 75 H use Get a quote.

AI Overview BETA

The Mobile 75 H is a mobile electro-hydraulic column lift system for raising vehicles with one master column and several slave columns. Double load protection works at every lift height, using mechanical safety ratchets alongside hydraulic locking valves to secure the raised load. Automotive workshops can set the adjustable forks for vehicle lifting without needing to fit adaptors.