Morbark - Diesel Wood Chipper | Beever 2021

Read more...

To contact Global Machinery Sales about Morbark Diesel Wood Chipper | Beever 2021 use Get a quote.

With its large capacity and high-production volume reduction capabilities, the Beever 2021 Brush Chipper is perfect for residential tree services, vegetation management, lot and land clearing, maintenance contractors and municipalities.

Features of this product

• 23 ½” (59.69cm) wide x 37 3/8″ (94.93cm) diametre, four dual-edged knife staggered-pocket drum with patented EZ Drum removable knife holders, dual-sided, chambered air impeller system and controllable air flow vents
• Dual horizontal feed wheels with TorqMax top feed wheel compression system, hydraulic lift assist and Variable Force constant hydraulic down pressure system with additional manually applied hydraulic down pressure at the valve handle.
• Live hydraulic system including: ball valve, pump, motor, and valve bank with additional pre-plumbed valve section for installation of an aftermarket winch package.
• 360° manual height-adjustable discharge
• Direct-drive bottom feed wheel
• Morthane Paint System: A chemically cured, electrostatically applied urethane coating with high-gloss finish, built-in UV protection, chip and chemical resistance and corrosion protection

Specifications of this product

• Chipping capacity: 20″ (50.8cm) 
• Height: 9’6″ (289.56cm) 
• Width (single/tandem axle): 7’7″ (231.14cm) 
• Width (single axle dual wheel): 8’5″ (256.54cm) 
• Length (single and tandem axle): 21’2″ (645.16cm)
• Gross weight (approx., single axle): 11,000 lbs. (4,990kgs)
• Gross weight (approximate, dual wheel or tandem axle): 12,200 lbs. (5,533.8kgs)
• Suspension: Single Axle: (1) 10,000 lb. (4,535.9kgs) Torflex 
• Suspension: Dual Wheel: (1) 12,000 lb. leaf (5,443.1kgs)
• Suspension: Tandem Axle: (2) 8,000 lb. torsion (3,628.7kgs)
• Infeed Opening: 65″ (165.1cm) wide x 38″ (96.52cm) high 
• Throat Opening: 31″ (78.74cm) wide x 20 ½” (52.07cm) high
• Drum: 23 ½” (59.69cm) wide x 37 3/8″ (94.93cm) diametre
• Engine (single axle and tandem axle): CAT diesel
• Horsepower (single axle): 215 HP
• Horsepower (tandem axle): 250 HP
• Fuel capacity: 60 gallons (227.12 litres)
• Hydraulic oil capacity: 41 gallons (155.2 litres) 
• Frame: 2″ (5.08cm) x 6″ (15.24cm) tubular 
• Tyres (single or tandem axle): 235/75Rx17 ½”
• Tyres (dual wheel): 235/80Rx16″
• Hitch: 2 ½” (63.5mm) Pintle 

Read less...

To contact Global Machinery Sales about Morbark Diesel Wood Chipper | Beever 2021 use Get a quote.