Mutoh Textile Printers I ValueJet 1938TX

Mutoh - Textile Printers I ValueJet 1938TX

Supplier: Mutoh Australia

Textile Printers I ValueJet 1938TX

1910mm (75") Direct to Textile Printer

14 Recent Views In Stock

Specifically targeted at sampling of short run on-demand & local digital production of garments, upholstery, fashion, swimwear, interior deco fabrics, home textiles, flags, etc.., the VJ-1938TX - a 75" (1910 mm) wide dual staggered head printer - combines proven technology with a high-precision mechanical design.

Features:

Eight colour, 75 inch (1910 mm) direct to textile printer
Mutoh genuine textile pigment ink: CMYKOBGK or 2x CMYK
Prints to coated polyester or pre-treated cotton and other natural fibres - one inkset*
Sliding platen cover makes printing to open weave media easy
Dual, staggered head setup with latest generation 1440 nozzle Piezo heads
Built-in fabric transport system with sensor driven front/rear tensioning
The textile tensioning cylinder is placed close to the platen to ensure even pressure across the width of the media
Head height can be set up to 6mm to allow for long fibre fabrics
Open RIP software architecture, supported by all major RIP vendors

Specifications:

Print Method	Drop-On Demand Piezo Drive Method
Number of Nozzles	Two heads in staggered arrangement (180 nozzles x 8 rows each)
Ink	Aqueous: Pigment and Dye Sublimation
Color Options	High speed: 2 x CMYK \| Extended gamut: CMYK + Orange, Green, Blue, Black
Minimum droplet size	3.3 pl
Variable dot	Yes
Print Modes	1440/1080/720/540/360 dpi
Head Height	Low: 2.5mm \| Medium: 3.5mm \| High: 6.0mm
Maximum Media Width	1910mm (75")
Maximum Media Core Width	2000mm (78.75")
Maximum Print Width	1900mm (74.8")

To contact Mutoh Australia about Mutoh Textile Printers I ValueJet 1938TX use Get a quote.

Features:

Eight colour, 75 inch (1910 mm) direct to textile printer
Mutoh genuine textile pigment ink: CMYKOBGK or 2x CMYK
Prints to coated polyester or pre-treated cotton and other natural fibres - one inkset*
Sliding platen cover makes printing to open weave media easy
Dual, staggered head setup with latest generation 1440 nozzle Piezo heads
Built-in fabric transport system with sensor driven front/rear tensioning
The textile tensioning cylinder is placed close to the platen to ensure even pressure across the width of the media
Head height can be set up to 6mm to allow for long fibre fabrics
Open RIP software architecture, supported by all major RIP vendors

Specifications:

Print Method	Drop-On Demand Piezo Drive Method
Number of Nozzles	Two heads in staggered arrangement (180 nozzles x 8 rows each)
Ink	Aqueous: Pigment and Dye Sublimation
Color Options	High speed: 2 x CMYK \| Extended gamut: CMYK + Orange, Green, Blue, Black
Minimum droplet size	3.3 pl
Variable dot	Yes
Print Modes	1440/1080/720/540/360 dpi
Head Height	Low: 2.5mm \| Medium: 3.5mm \| High: 6.0mm
Maximum Media Width	1910mm (75")
Maximum Media Core Width	2000mm (78.75")
Maximum Print Width	1900mm (74.8")