NSS Burnisher | eForce®

NSS - Burnisher | eForce®

Supplier: Industrial Brushware

Burnisher | eForce®

The eForce® Burnisher features the best burnishing technology in the industry combined with the superior productivity of a riding platform.

In Stock

Burnisher | eForce®

Patent-pending joystick control makes the eForce Burnisher simple to control and less fatiguing to drive.
Excellent visibility of the work area.
The zero turn radius design allows the burnisher to be used up against the wall and in tight areas.
The front mounted burnishing pad allows the eForce Burnisher to get into corners where other rider burnishers cannot.
Training is easy. A training manual is built into the touch screen control panel. In addition, all the important touch-points are identified with decals or our signature green color.
Hinged 90° flip-up burnishing head allows for compact storage and standing pad changes.
There are three pad pressure and drive speed settings to fine tune your burnishing process. For even more control, there is a "supervisor mode" which allows you to select which drive speeds and pad pressures your operators can use.
Six 6-volt 430 AH batteries provide up to 3 hours of constant run time.

Product Specifications:

Pad Speed	Variable 1500 to 1700 RPM (full load)
Pad Size	27 in. (68.5 cm)
Pad Driver	27 in. (68.5 cm)
Motor
Type	DC permanent magnet
Voltage	36 V
HP	3.6 HP
Sound Level	68 dBA
Batteries	Six 6 V, 430 AH
Drive	Dual Motor
Dual Drive Motors
Type	DC permanent magnet
Voltage	36 V
HP	0.25 HP each
Drive Speed	Variable transport, up to 396 ft./minute (121 m), Variable working, up to 264 ft./minute (80 m)
Switches & Controls	Master on/off key switch
	Emergency stop button/switch
	Touch Panel Control Panel for all other controls
	Joystick propulsion control
	Burnisher head raises machine 90° from operator to pad change position
Overload Protection	Controller protects motors from overloads
	125 amp reset circuit breaker
Construction
Frame	10-gage steel channel structure
Housing	Rotomolded control panel, motor cover, and bag cover
Flexiwall Shield	ABS plastic with steel liner
Wheels	10 in. x 2.5 in. (25.4 x 6.3 cm) non-marking
Casters	Two 6 in. (15 cm) ball-bearing swivel type
Dimensions
Length	62 in. (157 cm)
Storage Length	42 in. (107 cm)
Width	30 in. (76 cm)
Height	48.5 in. (123 cm)
Weight
Machine	1,100 lbs. (499 kg)
Shipping	1,200 lbs. (544 kg)
Shipping Class	70
Warranty	12 months limited
Productivity	35,640 sq. ft. per hour (3,311 sq. m)
	106,920 sq. ft. per charge (9,933 sq. m)

To contact Industrial Brushware about NSS Burnisher | eForce® use Get a quote.

Burnisher | eForce®

Patent-pending joystick control makes the eForce Burnisher simple to control and less fatiguing to drive.
Excellent visibility of the work area.
The zero turn radius design allows the burnisher to be used up against the wall and in tight areas.
The front mounted burnishing pad allows the eForce Burnisher to get into corners where other rider burnishers cannot.
Training is easy. A training manual is built into the touch screen control panel. In addition, all the important touch-points are identified with decals or our signature green color.
Hinged 90° flip-up burnishing head allows for compact storage and standing pad changes.
There are three pad pressure and drive speed settings to fine tune your burnishing process. For even more control, there is a "supervisor mode" which allows you to select which drive speeds and pad pressures your operators can use.
Six 6-volt 430 AH batteries provide up to 3 hours of constant run time.

Product Specifications:

Pad Speed	Variable 1500 to 1700 RPM (full load)
Pad Size	27 in. (68.5 cm)
Pad Driver	27 in. (68.5 cm)
Motor
Type	DC permanent magnet
Voltage	36 V
HP	3.6 HP
Sound Level	68 dBA
Batteries	Six 6 V, 430 AH
Drive	Dual Motor
Dual Drive Motors
Type	DC permanent magnet
Voltage	36 V
HP	0.25 HP each
Drive Speed	Variable transport, up to 396 ft./minute (121 m), Variable working, up to 264 ft./minute (80 m)
Switches & Controls	Master on/off key switch
	Emergency stop button/switch
	Touch Panel Control Panel for all other controls
	Joystick propulsion control
	Burnisher head raises machine 90° from operator to pad change position
Overload Protection	Controller protects motors from overloads
	125 amp reset circuit breaker
Construction
Frame	10-gage steel channel structure
Housing	Rotomolded control panel, motor cover, and bag cover
Flexiwall Shield	ABS plastic with steel liner
Wheels	10 in. x 2.5 in. (25.4 x 6.3 cm) non-marking
Casters	Two 6 in. (15 cm) ball-bearing swivel type
Dimensions
Length	62 in. (157 cm)
Storage Length	42 in. (107 cm)
Width	30 in. (76 cm)
Height	48.5 in. (123 cm)
Weight
Machine	1,100 lbs. (499 kg)
Shipping	1,200 lbs. (544 kg)
Shipping Class	70
Warranty	12 months limited
Productivity	35,640 sq. ft. per hour (3,311 sq. m)
	106,920 sq. ft. per charge (9,933 sq. m)

Read less...

To contact Industrial Brushware about NSS Burnisher | eForce® use Get a quote.

Brochure(0.16MB)

AI Overview BETA

The NSS eForce Burnisher is a battery-powered ride-on floor machine that burnishes floors with a 27 in. pad. Its zero-turn radius lets operators use the machine up against walls and in tight areas. Operators needing compact storage can raise the hinged burnishing head to store the machine using less floor space when it is parked between shifts.

Patent-pending joystick control makes driving less fatiguing
Front-mounted burnishing pad reaches corners other rider burnishers cannot
Three pad-pressure and drive-speed settings; supervisor mode selects which settings operators can use
Up to 3 hours of constant run time
12-month limited warranty

Source: listing by Industrial Brushware on IndustrySearch · Updated 3 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Industrial Brushware provide you with a quote