A properly watered battery lasts longer and performs better
The system consists of automatic shut-off valves mounted in each battery cell and interconnected with tubing. The valves replace standard vent caps. A quick coupling allows the end of the tubing to be connected to a water supply. When connected, water flows into each cell until the correct level has been reached. A flow indicator shows the operator when all the cells have been topped. The entire filling process takes just 30 seconds or less per vehicle.
Why choose Pro-Fill™?
Pro-Fill™ Onboard Battery Watering System is the only system that has been specifically designed for the golf car/utility vehicle application. At a glance, many of the superior features are evident. Everything from the patented manifolds, standard flame arrestors, three port swivel, and clampless polypropylene tubing, to the new easy install winged caps. But what's even more impressive is the structure inside the valve.
The Pro-Fill™ valve is capable of working independent of water pressure (3-35 static PSI, with 2 GPM flow rate), allowing you to use a variety of water supply options. In addition, the Pro-Fill™ valve includes a built in water barrier to block the propagation of a flame front from entering adjacent cells in the event of accidental cell gas ignition, while each valve includes an external flame arrested de-gas chamber as a standard.
How it works
The Pro-Fill™ valve operation features a breakthrough patented technology that sets a new standard for reliability and versatility with single point watering. Without levers, hinges, or pivot action, Pro-Fill™ valves can operate nearly independent of refill water supply pressure to accurately control cell electrolyte levels. Through Fluidic Displacer Valve Technology, it uses a dual, balanced valve design that allows the displacement force to act directly through the center of the valve without any mechanical leverage.
The Pro-Fill™ valve is very sensitive to the displacement force, allowing a very small displacer to be used. At the same time it is very insensitive to variations in the water supply pressure used, making it a true multi-pressure valve. Fluidic Displacer Technology allows the Pro-Fill™ valve to maintain the low profile and easy tube routing features.
- Golf Carts
- Custom Vehicles
- Electric Pallet Jacks
- Electric Sweepers and Scrubbers
- Stationary Power
We offer a variety of kit options that will meet your all of your needs. Each kit includes all items (excluding water supply) necessary for a complete installation.
Each kit contains:
- Manifolds with preinstalled valves
- Red End Caps
- Quick Coupler with Dust Cover
No Tools Necessary! Choose pre-cut kits for the quickest and easiest installation.
Universal kits are the perfect choice for installations on custom vehicles, pallet jacks, sweepers, scrubbers, stationary power, or any other application that requires the freedom of a custom installation, and the ease of a standard installation.
After installing your Profill system, you will realise cost benefits including extended battery life; increased performance; and cleaner floors, equipment and battery tops.
For more information on the Pro-Fill On-Board Battery Watering System please call or email us for a direct reply.