Pack King Personnel Lifter | LEV8-46

Pack King - Personnel Lifter | LEV8-46

Supplier: Pack King

Personnel Lifter | LEV8-46

1/2

Changing lights in the car park or the tennis court? How about setting microphone and light gantries in the theatre? Need to reach the guttering on a second story house? What about fitting signage to a fascia board? Painting a high wall?

single person lifter

This work is mainly performed using ladders, which can be dangerous. Occasionally a one person lifter or a scissor lift is hired, but now there is an alternative.

The LEV8-46 is a single person lifter - with a twist. Instead of climbing into the cage, then raising yourself up using electrics or hydraulics, all you need to do is to wind the carriage up to the desired height - to a maximum of 4.6 Mtr (max working height of 6.1 Mtrs), then walk up the telescoping ladder into the carriage.

Lift and lower is by hand 'brake' winch, which is only raising the carriage. When at the desired height, a safety pin prevents the cage from moving down. Raise slightly, pull the pin, then wind the cage down after you have finished your work.

Features:

Flip up edge boards on the carriage floor, prevent any tools from falling out.
The two front outriggers can be set in a rectangular or splayed pattern. They pivot and lock in the UP position when not in use, and pin down when required, with each having it's own winding handle.. You can be safe in the knowledge that the outriggers footprint is larger than the carriage footprint.
The rectangular base frame has 250mm diameter castors with brakes on the two swivels.
The operator carriage is hinged, which brings the overall height down to 2070 when fully down.
The footprint of 1300mm x 800mm can fit through standard doorways.
Unit weight is 190 Kgs.
Safety: A spring loaded pin is actuated if the cable goes slack. So along with the under mast pin, this is the second fail safe device fitted.
The LEV8-46 is wind rated to Level 4 (up to 7.9 Mtrs/sec) for outside use - unlike some single person lifters that have no wind rating.

To contact Pack King about Pack King Personnel Lifter | LEV8-46 use Get a quote.

This work is mainly performed using ladders, which can be dangerous. Occasionally a one person lifter or a scissor lift is hired, but now there is an alternative.

Features:

Flip up edge boards on the carriage floor, prevent any tools from falling out.
The two front outriggers can be set in a rectangular or splayed pattern. They pivot and lock in the UP position when not in use, and pin down when required, with each having it's own winding handle.. You can be safe in the knowledge that the outriggers footprint is larger than the carriage footprint.
The rectangular base frame has 250mm diameter castors with brakes on the two swivels.
The operator carriage is hinged, which brings the overall height down to 2070 when fully down.
The footprint of 1300mm x 800mm can fit through standard doorways.
Unit weight is 190 Kgs.
Safety: A spring loaded pin is actuated if the cable goes slack. So along with the under mast pin, this is the second fail safe device fitted.
The LEV8-46 is wind rated to Level 4 (up to 7.9 Mtrs/sec) for outside use - unlike some single person lifters that have no wind rating.

Read less...

To contact Pack King about Pack King Personnel Lifter | LEV8-46 use Get a quote.

AI Overview BETA

Pack King’s LEV8-46 is a single-person lifter that raises an operator in a carriage for access to elevated work areas. A hand-operated brake winch raises the carriage, then the operator climbs the telescoping ladder into it, rather than being raised electrically or hydraulically. Fitting fascia signage or painting high walls are examples of work for this lifter.

Slack cable triggers a spring-loaded pin, the second fail-safe device
Maximum carriage height 4.6 m; maximum working height 6.1 m
Wind-rated to Level 4 for outdoor use, up to 7.9 m/s
1,300 mm x 800 mm footprint fits through standard doorways
Unit weight: 190 kg

Source: listing by Pack King on IndustrySearch · Updated 1 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Pack King provide you with a quote

Supplier

Supplier: Pack King

Distribution: Australia, USA, Canada

Location: Bayswater , VIC

Customers: Assa Abloy, Avangrid, Wattyl

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Pack King are also proudly displaying these credentials:

Established:

2018

Employees:

1-5

Customers:

Assa Abloy, Avangrid, Wattyl

Distribution:

Australia, USA, Canada

Location:

Bayswater , VIC

Joined:

May 2019