ProTech Pumps Air Driven Liquid Pump | ...

ProTech Pumps - Air Driven Liquid Pump | PGD25 Price Guide: $2,478

Supplier: Solar Injection Australia

Air Driven Liquid Pump | PGD25

1/2

The PGD series of liquid pumps are double acting single 160mm air drive units that are capable of pressures in excess of 45,000 PSI / 3,200 BAR.

In Stock

Features of this product

Stainless steel wetter materials of construction
Specialised construction materials available
Polyurethane pressure seals as standard
UHMWPE, PTFE & other special seals available
Separation & drainage between hydraulic & pneumatic seals
No airline lubrication required
Compact and lightweight
Suitable for most hazardous areas
Available as a complete packaged system (PP3)

Specifications of this product

Nominal ratio: 25:1
Actual Pressure ratio: 28:1
Displacement per stroke: 6.47 cu in / 106.03 cc
Max outlet pressure: 3,369 psi / 232 BARG
Connection size inlet/oulet: 0.5" NPT / 0.5" NPT

To contact Solar Injection Australia about ProTech Pumps Air Driven Liquid Pump | PGD25 use Get a quote.

Features of this product

Stainless steel wetter materials of construction
Specialised construction materials available
Polyurethane pressure seals as standard
UHMWPE, PTFE & other special seals available
Separation & drainage between hydraulic & pneumatic seals
No airline lubrication required
Compact and lightweight
Suitable for most hazardous areas
Available as a complete packaged system (PP3)

Specifications of this product

Nominal ratio: 25:1
Actual Pressure ratio: 28:1
Displacement per stroke: 6.47 cu in / 106.03 cc
Max outlet pressure: 3,369 psi / 232 BARG
Connection size inlet/oulet: 0.5" NPT / 0.5" NPT

Read less...

To contact Solar Injection Australia about ProTech Pumps Air Driven Liquid Pump | PGD25 use Get a quote.

AI Overview BETA

The ProTech Pumps PGD25 is an air-driven liquid pump designed to pressurise liquids, with a maximum outlet pressure of 3,369 psi. Its air drive needs no airline lubrication, so operators avoid a lubrication step in the air supply. Stainless steel wetted materials and polyurethane pressure seals come standard, while UHMWPE, PTFE and other special seals give buyers alternative seal choices.

Nominal ratio: 25:1; actual pressure ratio: 28:1
Displacement per stroke: 6.47 cu in / 106.03 cc
Inlet and outlet connections: 0.5" NPT each
Available as a complete PP3 packaged system
Suitable for most hazardous areas

Source: listing by Solar Injection Australia on IndustrySearch · Updated 31 Oct 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Solar Injection Australia provide you with a quote