RMT RMT 25 (TH) -Wagon Drill
RMT - RMT 25 (TH) -Wagon Drill Price Guide: $11,000
The Top Hammer version of RMT Wagon Drill is equipped with very high performer pneumatic drifter “RMT 120F” which is the same as “BBC 120F Drifter”.
The Top Hammer version of RMT Wagon Drill is equipped with very high performer pneumatic drifter “RMT 120F” which is the same as “BBC 120F Drifter”. The drifter comes with Rifle Bar Rotation feature. With a quick conversion kit, Top Hammer Version can be converted to the DTH version of Wagon Drill. It is mostly used in Open Cast Machine with 5.1-meter long Feed Beam and Sand & Limestone mines with 4.2-meter long Feed Beam. It is also used in underground mines with 2.5-meter long Feed Beam.
| Model # | RMT 25 (TH) | |
| Version | Top Hammer | |
| Pneumatic Drifter | RMT 120F | BBC 120F | |
| Drilling Depth | 20 - 40 meter (66 feet - 131 feet) | |
| Hole Diameter | 48 - 76 mm | 2" - 3" |
| Drill Steel | R32 / R38 / T38 | |
| Drill Steel Length | 1.20 Meter, 2.50 Meter, 3 Meter | |
| Air Consumption | 400 cfm at 7 bar | |
| Details of Feed and boom | As below | |
| Feed Type | Chain Drive | |
| Feed Beam Length | 5430 mm, 4425 mm, 2825 mm | |
| Travel Length | 3940 mm, 2200 mm, 1500 mm | |
| Feed Force | 8kN | 1.8 lb |
| Boom type | Single section hand operated Hydraulic cylinder | |
| Details of Carrier | Details in attached brochure | |
| Transport Dimensions | Details in attached brochure | |
To contact Rama Mining Tools about RMT RMT 25 (TH) -Wagon Drill use Get a quote.
The Top Hammer version of RMT Wagon Drill is equipped with very high performer pneumatic drifter “RMT 120F” which is the same as “BBC 120F Drifter”. The drifter comes with Rifle Bar Rotation feature. With a quick conversion kit, Top Hammer Version can be converted to the DTH version of Wagon Drill. It is mostly used in Open Cast Machine with 5.1-meter long Feed Beam and Sand & Limestone mines with 4.2-meter long Feed Beam. It is also used in underground mines with 2.5-meter long Feed Beam.
| Model # | RMT 25 (TH) | |
| Version | Top Hammer | |
| Pneumatic Drifter | RMT 120F | BBC 120F | |
| Drilling Depth | 20 - 40 meter (66 feet - 131 feet) | |
| Hole Diameter | 48 - 76 mm | 2" - 3" |
| Drill Steel | R32 / R38 / T38 | |
| Drill Steel Length | 1.20 Meter, 2.50 Meter, 3 Meter | |
| Air Consumption | 400 cfm at 7 bar | |
| Details of Feed and boom | As below | |
| Feed Type | Chain Drive | |
| Feed Beam Length | 5430 mm, 4425 mm, 2825 mm | |
| Travel Length | 3940 mm, 2200 mm, 1500 mm | |
| Feed Force | 8kN | 1.8 lb |
| Boom type | Single section hand operated Hydraulic cylinder | |
| Details of Carrier | Details in attached brochure | |
| Transport Dimensions | Details in attached brochure | |
To contact Rama Mining Tools about RMT RMT 25 (TH) -Wagon Drill use Get a quote.
The RMT 25 (TH) is a top-hammer wagon drill that drills holes using an RMT 120F pneumatic drifter. A quick conversion kit lets the top-hammer machine change to the DTH version, so one drill can work in either configuration. The drill is used in open-cast, sand and limestone, and underground mines, with feed beams available for each setting.
- The drifter has Rifle Bar Rotation
- Drilling depth: 20–40 metres
- Hole diameter: 48–76 mm
- Drill steel options: R32, R38 and T38
- Air consumption: 400 cfm at 7 bar
Source: listing by Rama Mining Tools on IndustrySearch · Updated 4 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Rama Mining Tools on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
-280x280-state_7.jpg)
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales