RobaPUR 2 MOD Adhesive Melter

Read more...

To contact Robatech about RobaPUR 2 MOD Adhesive Melter use Get a quote.

The RobaPUR 2 MOD adhesive adhesive melter is designed for processing different hot melt adhesives hot melt adhesives in block, granular, and cushion form. Particularly developed for demand-depending melting (Melt-on-Demand), it is suitable for processing almost all commercially available PUR adhesives as well as for PSA, EVA, and APAO hot melt adhesives.

The overall design of the RobaPUR 2 MOD is tailored to flexible production with short retrofit times. Switching between reactive and thermoplastic adhesives as well as color changes are quick and easy – without major cleaning effort. The innovative magazine and melting concept enables a significant increase in the melting rate to up to 10 kg/h. Depending on the pump selection, the adhesive melter can achieve delivery capacities of 9 – 12 kg/h. In highly dynamic processes (SpineCoat applications, adhesive binding in perfect binder soft covers 200 – 2000 T/h), up to 50 kg/h are possible.

• Melt-on-Demand (MOD) technology ensures comprehensive protection of the adhesive characteristics of the melted material.
• Processing of most commercially available PUR hot melt adhesives without additional inert gas flushing and active cooling.
• Adhesive viscosities (depending on variant and pump type): 500 - 120,000 mPas
• Adhesives with and without inliner
• Self-calibrating level sensor for precise filling level monitoring
• Consistent thermal separation between heating zones and magazine for high operating safety
• Non-stuck coating for reduced and quick adhesive changes with different color (PUR applications in the woodworking industry)
• TRM standard graphic panel for language-independent operation
• Integrated AS IK 40 or AS IK 10 application control

The RobaPUR 2 MOD is available in three variants with different pump configurations. With that, the adhesive melter can be tailored optimally to customer- and process-specific requirements.

1-block magazine

The 1-block magazine is suitable for simple applications with low adhesive flow.

• Magazine for 2...2.5 kg block.
• Basin filling: Gerotor pump GPR 12, max. 9 kg/h, viscosities from 2,500 to 120,000 mPas
• Nozzle application: Gear pump ZPR 12, max. 12 kg/h, viscosities from 500 to 120,000 mPas
• For adhesives without inliner

1-block magazine with press

The 1-block magazine with press is available for highly dynamic processes. It was specially developed for the use in clocked PUR applications of the bookbinding industry.

• Magazine for 2...2.5 kg block.
• Basin filling: Gerotor pump GPR 12, max. 9 kg/h, viscosities from 2,500 to 120,000 mPas
• PUR spine nozzle application: Gear pump ZP3 S, max. 50 kg/h, viscosities from 500 to 10,000 mPas
• For PUR hot melt adhesives with inliner

Thanks to the high melting rate and different configurations, the RobaPUR 2 MOD can be used in different applications and processes:

• Packaging industry ISC 200
• Graphical industry ISC 300
• Textile industry ISC 590
• Wood industry ISC 690
• Construction supply industry ISC 790
• Automotive industry ISC 820

Typical areas of application of the RobaPUR 2 MOD are basin filling, manual application using a hand applicator, as well as bead and surface application with nozzle systems.

2-block magazine

The 2-block magazine is recommended for applications with high adhesive flow. Compared to the 1-block magazine, significantly less refilling intervals are required and the process performance is improved with increased production due to higher magazine filling.

Read less...

To contact Robatech about RobaPUR 2 MOD Adhesive Melter use Get a quote.