Roland DG Cold Laminators | VersaLAM

Roland DG - Cold Laminators | VersaLAM

Supplier: Roland DG

Cold Laminators | VersaLAM

Designed For Quality

In Stock

The VersaLAM benchtop cold laminators are fully Australian made with quality locally sourced components. Available at 650mm or 850mm wide, these versatile laminators come with a range of advanced features. Built with quality in mind, VersaLAM will provide quality finishing for a wide range of materials with very low maintenance requirements. Ideal for applying pressure sensitive films and double sided adhesives to inkjet media as used widely in the signage industry.

Key Features

Perfect for use on a benchtop or free standing with the VL Trolley
2 x 60mm ground and polished rollers
Rollers open to 3mm - 6mm
Variable speed of 0-4 meters per minute
Double width feed table
Forward and reverse functions
Foot switch for ease of operation
Double width feed table
Cutting Channel on back tray
Side handle for lifting rollers

Additional Safety Features

Emergency stop
Safety on/off switch
Covered upper rewind for release liner
Safe rear cutting slot in rear tray
Safety Cover on foot switch (Option)

To contact Roland DG about Roland DG Cold Laminators | VersaLAM use Get a quote.

Key Features

Perfect for use on a benchtop or free standing with the VL Trolley
2 x 60mm ground and polished rollers
Rollers open to 3mm - 6mm
Variable speed of 0-4 meters per minute
Double width feed table
Forward and reverse functions
Foot switch for ease of operation
Double width feed table
Cutting Channel on back tray
Side handle for lifting rollers

Additional Safety Features

Emergency stop
Safety on/off switch
Covered upper rewind for release liner
Safe rear cutting slot in rear tray
Safety Cover on foot switch (Option)

Read less...

To contact Roland DG about Roland DG Cold Laminators | VersaLAM use Get a quote.

AI Overview BETA

Roland DG VersaLAM cold laminators are Australian-made benchtop machines that apply pressure-sensitive films and double-sided adhesives to inkjet media, using locally sourced components. Their variable feed speed runs from 0 to 4 metres per minute, letting operators adjust the rate at which material feeds through. Signage businesses can use them on a benchtop or as freestanding units with the VL Trolley.

Available in 650 mm or 850 mm widths
Two 60 mm ground and polished rollers
Rollers open to a 3–6 mm gap
Emergency stop, safety on/off switch, covered upper rewind and rear safety cutting slot
Optional safety cover for the foot switch

Source: listing by Roland DG on IndustrySearch · Updated 6 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Roland DG provide you with a quote