Enerpat SCE5000 Hydraulic Mobile Scrap ...

Enerpat - SCE5000 Hydraulic Mobile Scrap Car Baler

Supplier: Enerpat

SCE5000 Hydraulic Mobile Scrap Car Baler

The ENERPAT SCE5000 is a heavy-duty hydraulic car baler for end-of-life vehicles and scrap metal. Its large chamber accepts whole cars, delivering dense, transport-ready bales while reducing pre-cutting and dismantling requirements.

Whole Car Baling, High-Density Bales

Key Advantages

16’-4.85” box length × 5’-10.87” box width × 3’-11.24” box height provides a large loading chamber for whole passenger cars and bulky scrap.
163-ton main cylinder delivers high compression force for dense and stable vehicle bales.
Three independent Level 1 and three Level 2 press cylinders provide multi-stage compression for efficient folding and high bale density.
Hardox 500 wear plates protect high-wear areas inside the compression chamber and extend service life under demanding scrap processing conditions.
Cummins QSB6.7-C160-31 160 HP diesel engine provides independent power for outdoor yards, remote recycling sites and locations without reliable grid power.
850 × 650 mm (34” × 26”) bale size produces compact, stackable bales optimized for storage, handling and transportation.
Bale density =50 lb/ft³ for car bodies improves material compaction and helps reduce transportation volume.
Remote control operation allows convenient machine operation during vehicle loading and baling.
Forward bale discharge provides fast and straightforward bale removal after compression.
Portable-leg design allows the machine to be transported between different recycling sites.
Rexroth hydraulic components and Schneider electrical components provide reliable control and stable operation.
Production Capability: approximately 10–15 vehicles per hour, depending on vehicle type, loading method and operating conditions.

Typical Applications

The SCE5000 is suitable for processing:

End-of-life vehicles
Passenger cars
Automobile shells
Light scrap metal
Sheet metal
White goods
Mixed ferrous scrap
Automotive metal components

Heavy-Duty Construction

The SCE5000 is built for continuous scrap processing with a reinforced structural frame and Hardox 500 wear protection in high-friction areas. The hydraulic system is designed for high-pressure operation, while the Cummins diesel power unit allows the baler to operate independently of external electrical power.

With its large loading chamber, high compression force and transportable design, the ENERPAT SCE5000 provides a practical solution for recyclers handling high volumes of end-of-life vehicles and bulky scrap metal.

Key Advantages

16’-4.85” box length × 5’-10.87” box width × 3’-11.24” box height provides a large loading chamber for whole passenger cars and bulky scrap.
163-ton main cylinder delivers high compression force for dense and stable vehicle bales.
Three independent Level 1 and three Level 2 press cylinders provide multi-stage compression for efficient folding and high bale density.
Hardox 500 wear plates protect high-wear areas inside the compression chamber and extend service life under demanding scrap processing conditions.
Cummins QSB6.7-C160-31 160 HP diesel engine provides independent power for outdoor yards, remote recycling sites and locations without reliable grid power.
850 × 650 mm (34” × 26”) bale size produces compact, stackable bales optimized for storage, handling and transportation.
Bale density =50 lb/ft³ for car bodies improves material compaction and helps reduce transportation volume.
Remote control operation allows convenient machine operation during vehicle loading and baling.
Forward bale discharge provides fast and straightforward bale removal after compression.
Portable-leg design allows the machine to be transported between different recycling sites.
Rexroth hydraulic components and Schneider electrical components provide reliable control and stable operation.
Production Capability: approximately 10–15 vehicles per hour, depending on vehicle type, loading method and operating conditions.

Typical Applications

The SCE5000 is suitable for processing:

End-of-life vehicles
Passenger cars
Automobile shells
Light scrap metal
Sheet metal
White goods
Mixed ferrous scrap
Automotive metal components

Heavy-Duty Construction

Read less...

To contact Enerpat about Enerpat SCE5000 Hydraulic Mobile Scrap Car Baler use Get a quote.

Let Enerpat provide you with a quote

Supplier

Supplier: Enerpat

Distribution: Global Markets

Location: OutsideAustralia

Customers: Mercedes Benz, US Caterpillar, BASF, Bayer

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Enerpat are also proudly displaying these credentials:

Established:

1936

Employees:

51-200

Customers:

Mercedes Benz, US Caterpillar, BASF, Bayer

Certifications:

CE/ISO

Distribution:

Global Markets

Location:

, Outside Australia