Schlebach Sheet Metal Machinery | RollFormer ...

Schlebach - Sheet Metal Machinery | RollFormer Price Guide: $82,280

Supplier: Stamac Engineering Consultant

Sheet Metal Machinery | RollFormer

The electro-hydraulic notching unit EHA is used to mechanically produce round notching in double standing seam profiles to prepare them for assembly.

15 Recent Views

Features of this product

These are used as lower and upper fold ends on roofs, dormers, facades and balustrades with different center’s of gravity like eaves and roofing joints, flues, mono, pitched roofs, facades bases, pelmets, verges, lintels, etc.
Parallel, oblique or conical plates may also be notched. Procedure: notching – feed forward – fold back.
The machine is equipped with segment rails in the upper beam, bending beam and the Supporting table.
For this reason, it is also possible to fold back rhombic plates and shingles (see sketch), for mirrored covering and coffered roof Slabs.
Working widths may vary from 300 - 800 mm, the notching and fold back width and angle (inwards and outwards) are adjustable.

To contact Stamac Engineering Consultant about Schlebach Sheet Metal Machinery | RollFormer use Get a quote.

Features of this product

These are used as lower and upper fold ends on roofs, dormers, facades and balustrades with different center’s of gravity like eaves and roofing joints, flues, mono, pitched roofs, facades bases, pelmets, verges, lintels, etc.
Parallel, oblique or conical plates may also be notched. Procedure: notching – feed forward – fold back.
The machine is equipped with segment rails in the upper beam, bending beam and the Supporting table.
For this reason, it is also possible to fold back rhombic plates and shingles (see sketch), for mirrored covering and coffered roof Slabs.
Working widths may vary from 300 - 800 mm, the notching and fold back width and angle (inwards and outwards) are adjustable.

Read less...

To contact Stamac Engineering Consultant about Schlebach Sheet Metal Machinery | RollFormer use Get a quote.

AI Overview BETA

The Schlebach EHA is an electro-hydraulic notching unit that mechanically cuts round notches in double standing seam profiles to prepare them for assembly. Operators can adjust the fold-back angle inwards or outwards to set the fold direction. For roofing, dormer, facade and balustrade work, it forms lower and upper fold ends at eaves, verges, roofing joints and flues.

Working widths range from 300 to 800 mm
Notching and fold-back widths are adjustable
Machine follows a notching, feed-forward and fold-back sequence
Handles parallel, oblique or conical plates
Folds back rhombic plates and shingles for mirrored covering and coffered roof slabs

Source: listing by Stamac Engineering Consultant on IndustrySearch · Updated 2 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Stamac Engineering Consultant provide you with a quote

Supplier

Supplier: Stamac Engineering Consultant

Distribution: Australia & New Zealand-Wide

Location: Keysborough, VIC

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Stamac Engineering Consultant are also proudly displaying these credentials:

Established:

2000

Distribution:

Australia & New Zealand-Wide

Location:

Keysborough , VIC

Joined:

Feb 2023

Level:

Premium Storefront

Verified: