The Small Main Board, Monarch SMB1/15 has been developed to reduce the installation time required for CT metered switchboards. It is a Form 2, IP66, small main board enclosure, manufactured to AS3439-1 and is suitable for installations that require CT metering.
The Small Main Board is suitable for supplies up to 630 amps, and comes installed with all the sections and panels required for the application.
The enclosure comprises of a double-hinged insulated meter panel at the top which is segregated from the central CT chamber using a shelf. The CT compartment contains an acrylic removable screen and a sealable hinged escutcheon in the centre section. The cable can be segregated within the CT chamber using a purpose built duct, and there is a built in potential fuse bracket predrilled for easy installation.
The bottom section of the enclosure is divided into two isolated compartments for incoming (supply authority) and outgoing (consumer) supplies, with cable entry via two separate 3 mm thick aluminium gland plates. The supply authority side contains a service protection device panel and the main neutral bar covered by a sealable fixed escutcheon. In the consumer section is a neutral bar, earth bar and panel covered with a fixed escutcheon. Internal traffolyte labels are also included as part of the enclosure system package.
The SMB1/15 has not only been designed to AS3439-1, but type tested to a maximum fault level of 31.5kA for 1 second (CT chassis). This ensures that any board built with this enclosure system is suitably certified to ensure compliance with regulations in all states.
The enclosure itself has been developed from the well proven B&R Monarch IP range. It is made from robust, corrosion resistant 1.6 mm thick zinc coated steel, powdercoated to an average thickness of 100 µm. Other materials are also available on request, including powder coated aluminium and 316 stainless steel, for applications requiring the ultimate in corrosion resistance. The SMB1/15 is also supplied complete with a 75mm high, hot dip galvanised channel iron plinth for easy mounting to the ground.
For full details of the SMB1/15 enclosure, contact B&R’s office in your state, their head office on 07 3714 1000, or www.brenclosures.com.au.
B&R Enclosures is Australia's largest manufacturer of enclosures, racks, cabinets, switchboard building systems and climate control equipment.
Since operations began in 1955, B&R Enclosures has been ...