Static Control Equipment | EB Discharge Antistatic Bar IDB-7

The Intelligent Discharging Bar IDB-7 (shockless) we produce can be used in many sectors, such as textile manufacturing, paper, plastics, printing, in converting, packaging etc.
The anti-static bar IDB-7 is designed to be installed in machines working at high speed, his design is very compact 40×25 mm and the profile is in FR-ABS filled with epoxy resin.

This anti-static bar has an integrate power supply, so no high tension cable is needed, only 12-24 V supply, the frequency is adjustable (0-20 Hz) and is provided with clean pin alert by a led and remote signal PNP and NPN.
Green/blu flashing= ok, Violet= needs cleaning, Red=fault.
The emitters (option tungsten) are connected resistively to high voltage, so there are no risks for the operator in the event of accidental contact.

Our antistatic bars are custom made according to customers’ requirements.
This antistatic bar has a slit where to place the M5 screws for fastening, so it is possible to place them anywhere for the entire length of the bar.

Technical Details

• Working distance: 20-200 mm
• Operating voltage: 7500 pulsed
• Frequency: Adjustable 0-20 Hz
• Integrate power supply: Integrato 12-24 Vdc input
• Weight: 1,2 Kg/m
• Ambient temperature: 0°C-70 °C Max humidity 65%
• Lengths: From 250mm to 5000mm

To contact Aldus Graphics about Static Control Equipment | EB Discharge Antistatic Bar IDB-7 use Get a quote.

The Intelligent Discharging Bar IDB-7 (shockless) we produce can be used in many sectors, such as textile manufacturing, paper, plastics, printing, in converting, packaging etc.
The anti-static bar IDB-7 is designed to be installed in machines working at high speed, his design is very compact 40×25 mm and the profile is in FR-ABS filled with epoxy resin.

This anti-static bar has an integrate power supply, so no high tension cable is needed, only 12-24 V supply, the frequency is adjustable (0-20 Hz) and is provided with clean pin alert by a led and remote signal PNP and NPN.
Green/blu flashing= ok, Violet= needs cleaning, Red=fault.
The emitters (option tungsten) are connected resistively to high voltage, so there are no risks for the operator in the event of accidental contact.

Our antistatic bars are custom made according to customers’ requirements.
This antistatic bar has a slit where to place the M5 screws for fastening, so it is possible to place them anywhere for the entire length of the bar.

Technical Details

• Working distance: 20-200 mm
• Operating voltage: 7500 pulsed
• Frequency: Adjustable 0-20 Hz
• Integrate power supply: Integrato 12-24 Vdc input
• Weight: 1,2 Kg/m
• Ambient temperature: 0°C-70 °C Max humidity 65%
• Lengths: From 250mm to 5000mm

Read less...

To contact Aldus Graphics about Static Control Equipment | EB Discharge Antistatic Bar IDB-7 use Get a quote.