Swing Doors | Gilgen FD20-F Fire and Inverse ...
Swing Doors | Gilgen FD20-F Fire and Inverse
The Gilgen FD20-F Fire and Inverse automatic door operators provide specialized offerings for specific applications.
In fire door applications, the operator will activate on a smoke and or fire signal. In case of fire, a signal from the unique in-built smoke and heat detector or fire alarm system, triggers immediately, closing off the passage. Closing takes place by spring force. The mechanical sequential control also enables double leaf fire doors to be used.
In the Inverse application, the shutting movement uses energy stored in the spring, which, depending on requirements is also motor-assisted. Even without motor assistance, thanks to ingenious mechanics, optimum power deployment is achieved in the entire door swing area. This is necessary to move the door reliably to its end position against draft resistance for example, and also complies with BCA and current safety standard requirements.
The Gilgen FD20-F is available to operate doors in sizes EN4 to EN6. The different spring forces required can be quickly and precisely adjusted on the spot using the special adjustment screw. In detail, this model also provides many other sophisticated features, allowing pre-defined door types to be quickly and easily adapted to project-specific requirements.
FD20 Fire
The FD20-F Fire has been tested and approved by a NATA accredited laboratory (cert: 34059600b.1)
Especially suitable for use in:
- Fire and smoke protection barriers
Special Benefits
- Compact design thanks to in-built fire protection components
- Door systems can also be connected to on-site fire control
- Standard Options board to connect smoke and heat detector ports
- Can be used with various fire protection profile systems
FD20 Inverse
The FD20 Inverse has the ability to open without mains power
Especially suitable for use in:
- Escape routes / emergency exists
- Venting of smoke and heat
- Securing guide routes for pedestrians
Key Benefits
- No emergency power supply required
- Opens by spring force
- Door hinge is integrated into drive (no tripping hazard on the ground)
To contact Access Entry about Swing Doors | Gilgen FD20-F Fire and Inverse use Get a quote.
In fire door applications, the operator will activate on a smoke and or fire signal. In case of fire, a signal from the unique in-built smoke and heat detector or fire alarm system, triggers immediately, closing off the passage. Closing takes place by spring force. The mechanical sequential control also enables double leaf fire doors to be used.
In the Inverse application, the shutting movement uses energy stored in the spring, which, depending on requirements is also motor-assisted. Even without motor assistance, thanks to ingenious mechanics, optimum power deployment is achieved in the entire door swing area. This is necessary to move the door reliably to its end position against draft resistance for example, and also complies with BCA and current safety standard requirements.
The Gilgen FD20-F is available to operate doors in sizes EN4 to EN6. The different spring forces required can be quickly and precisely adjusted on the spot using the special adjustment screw. In detail, this model also provides many other sophisticated features, allowing pre-defined door types to be quickly and easily adapted to project-specific requirements.
FD20 Fire
The FD20-F Fire has been tested and approved by a NATA accredited laboratory (cert: 34059600b.1)
Especially suitable for use in:
- Fire and smoke protection barriers
Special Benefits
- Compact design thanks to in-built fire protection components
- Door systems can also be connected to on-site fire control
- Standard Options board to connect smoke and heat detector ports
- Can be used with various fire protection profile systems
FD20 Inverse
The FD20 Inverse has the ability to open without mains power
Especially suitable for use in:
- Escape routes / emergency exists
- Venting of smoke and heat
- Securing guide routes for pedestrians
Key Benefits
- No emergency power supply required
- Opens by spring force
- Door hinge is integrated into drive (no tripping hazard on the ground)
To contact Access Entry about Swing Doors | Gilgen FD20-F Fire and Inverse use Get a quote.
The Gilgen FD20-F Fire and Inverse are automatic door operators that control opening and closing through fire and inverse modes. In Fire mode, a signal from the built-in smoke and heat detector or alarm system triggers spring-powered closure of the passage. The Inverse version suits escape routes because it opens without mains power and requires no emergency power supply.
- FD20-F Fire was tested and approved by a NATA-accredited laboratory (certificate 34059600b.1)
- Mechanical sequential control enables double-leaf fire doors
- Operates doors in sizes EN4 to EN6
- Spring force adjusts on site using a special adjustment screw
- Inverse door hinge is integrated into the drive, avoiding a ground-level trip hazard
Source: listing by Access Entry on IndustrySearch · Updated 2 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Access Entry on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Automatic Sliding Doors | SZL 100
Automatic Sliding Doors | SLA250
Automatic Sliding Doors | SLX300
4Safe Door Sensor
Eagle Door Sensor
IXIO Door Sensor
Swing Doors | Gilgen FD20-F Fire and Inverse
Swing Doors | Gilgen FD20
Sliding Doors | Gilgen SLX-M
Hermetic Automatic Door | Gilgen SLX-D
High Impact Traffic Doors | DMF
High Speed Folding Swing Door | Efaflex
Traffic Swing Doors | DMF
Hygienic Swing Doors | Dortek GRP
Swing Doors | Impact Traffic
Model MK5 Swing Doors
Thermal High Impact Swing Doors | Coldshield 4500
Corrosion Resistant Hygiene Doors | Coldshield 5000
Swing Doors | Gilgen FD20
Traffic Security Door | TD001
Swing Doors
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales