Tenpack High Density Presses | Automated

Tenpack - High Density Presses | Automated

Supplier: Tenpack

High Density Presses | Automated

The process starts with an automated feed table on which the loader operator places the incoming big bales.

In Stock

Features of this product

The machine accepts both 3x3 and 4x3 big bales.
This table then advances the big bales into the cutter box which tilts them on their edge to allow for the proper cut. Once the bale has been sliced into sections of 16” x 35”, the bottom slab is slid over, allowing the next slab to fall down behind. These slabs are then pushed forward into the weigh chamber while the operator removes the old twines. Here the simple adjustable beam scale determines the proper amount of hay, which is sectioned off by the feed forks. At this time, the weighed slab is split and advanced onto the lift table.

To contact Tenpack about Tenpack High Density Presses | Automated use Get a quote.

Features of this product

The machine accepts both 3x3 and 4x3 big bales.
This table then advances the big bales into the cutter box which tilts them on their edge to allow for the proper cut. Once the bale has been sliced into sections of 16” x 35”, the bottom slab is slid over, allowing the next slab to fall down behind. These slabs are then pushed forward into the weigh chamber while the operator removes the old twines. Here the simple adjustable beam scale determines the proper amount of hay, which is sectioned off by the feed forks. At this time, the weighed slab is split and advanced onto the lift table.

To contact Tenpack about Tenpack High Density Presses | Automated use Get a quote.