Geosense Tilt Sensor | MEMS

Geosense - Tilt Sensor | MEMS

Supplier: Papworths Construction Testing Equipment

Tilt Sensor | MEMS

Geosense In-Place Tilt Meters are available in both uniaxial or biaxial options, which is measured from the plane(s) perpendicular from the base unit.

In Stock

Applications for this product

Retaining walls
Diaphragm walls
Concrete dams
Party walls
Structures
Bridge piers
Tunnels
Compensation grouting
Slopes
Piles

Features of this product

Designed to be installed temporality or permanently, in either vertical or horizontal positions. The sensor’s output can be collected via a readout or connected into a data logger for continuous monitoring.
The tilt sensor is built in a rugged, heavy duty waterproof die-cast IP67 rated metal enclosure suitable for the harsh environments.
Output options include analogue (±V and mA) or digital (RS484).
Each unit is supplied calibrated assuring accuracy and repeatability and can be used with any readily available data-loggers.
The Digital Version offers the greatest measurement accuracies and minimises deployment & setup time with several sensors daisy-chained on a single cable minimising costly cabling requirement.
The sensing system built on the well-known MEMS technology offers built in features such as temperature and linearity compensation. A thermistor connected to the case compensates for in-field temperature fluctuations.
Available in a range of measurement ranges including ±5° or ±10° or ±15° measurement ranges featuring a resolution from 0.0005° with an accuracy of ±0.0013° for the ±5° sensor to ±0.004° for the ±15° sensor.
The complete range features repeatability of ±0.002°
Ultimate accuracy and repeatability
Uniaxial or biaxial sensors option
EMC-CE & LUL compliant
LSHF cable option
Horizontal or vertical mounting
Easy to install
Digital bus available (RS-485)
Analogue output
IP66 waterproof enclosure
Durable powder coating
Cost effective

Specifications of this product

Operating Temperature: -40 to + 85°C
Sensor: MEMS
Excitation: 8-15VDC
Physical: IP67 Die-cast Al Housing 160 x 85 x 60 mm 950g
Cable: Multi-core Braided and Shielded Instrument Grade

To contact Papworths Construction Testing Equipment about Geosense Tilt Sensor | MEMS use Get a quote.

Applications for this product

Retaining walls
Diaphragm walls
Concrete dams
Party walls
Structures
Bridge piers
Tunnels
Compensation grouting
Slopes
Piles

Features of this product

Designed to be installed temporality or permanently, in either vertical or horizontal positions. The sensor’s output can be collected via a readout or connected into a data logger for continuous monitoring.
The tilt sensor is built in a rugged, heavy duty waterproof die-cast IP67 rated metal enclosure suitable for the harsh environments.
Output options include analogue (±V and mA) or digital (RS484).
Each unit is supplied calibrated assuring accuracy and repeatability and can be used with any readily available data-loggers.
The Digital Version offers the greatest measurement accuracies and minimises deployment & setup time with several sensors daisy-chained on a single cable minimising costly cabling requirement.
The sensing system built on the well-known MEMS technology offers built in features such as temperature and linearity compensation. A thermistor connected to the case compensates for in-field temperature fluctuations.
Available in a range of measurement ranges including ±5° or ±10° or ±15° measurement ranges featuring a resolution from 0.0005° with an accuracy of ±0.0013° for the ±5° sensor to ±0.004° for the ±15° sensor.
The complete range features repeatability of ±0.002°
Ultimate accuracy and repeatability
Uniaxial or biaxial sensors option
EMC-CE & LUL compliant
LSHF cable option
Horizontal or vertical mounting
Easy to install
Digital bus available (RS-485)
Analogue output
IP66 waterproof enclosure
Durable powder coating
Cost effective

Specifications of this product

Operating Temperature: -40 to + 85°C
Sensor: MEMS
Excitation: 8-15VDC
Physical: IP67 Die-cast Al Housing 160 x 85 x 60 mm 950g
Cable: Multi-core Braided and Shielded Instrument Grade

Read less...

To contact Papworths Construction Testing Equipment about Geosense Tilt Sensor | MEMS use Get a quote.

AI Overview BETA

Geosense’s MEMS tilt sensor measures changes in inclination relative to the plane perpendicular to its base, for temporary or permanent installation. Its digital version lets several sensors share one cable in a daisy chain, reducing cabling requirements during deployment. For retaining walls and bridge piers, horizontal or vertical mounting gives installers a choice of orientation to suit the structure.