Toro Stationary Compactor Bins
Toro - Stationary Compactor Bins
TORO Stationary Compactor bins designed to suit all major brands of stationary compactor units.
Used in combination with a stationary compactor unit to contain and transport compacted waste and recycling materials. Compactor bins are transported by vehicles fitted with hydraulic Hooklift loader. Bins are lockable and weatherproof.
KEY BENEFITS
- Tapered design to improve load release
- Internal mitred roll plate
- Fully welded body
- Heavy duty rollers and door hinges with grease points
- Ratchet door locking mechanism with high tensile safety chain and catch
- 600gsm PVC aperture tarp reinforced with full width webbing bands, eyelets and elastic shock cord
CONSTRUCTION
- Steel Grade Plate AS/NZS 1594-HA250
- Steel Grade Structural AS/NZS 3679.1-300, AS1163-C350L0
- Floor Thickness 5 mm
- Wall Thickness 3 mm
- Main Runner 180 pfc
- Frame Member 180 pfc
- Lifting Ring Ø50 mm
- Roller Ø165 mm
- Finish Primed and painted with two (2) coats of premium high gloss enamel
OPTIONAL
- Two end pick-up
- Nylon rollers
- Rubber door seal
- Internal epoxy coating
STANDARD SIZES
- 23m
- 25m
- 30m
- 32m
- 35m
- 38m
To contact Toro Waste Equipment about Toro Stationary Compactor Bins use Get a quote.
Used in combination with a stationary compactor unit to contain and transport compacted waste and recycling materials. Compactor bins are transported by vehicles fitted with hydraulic Hooklift loader. Bins are lockable and weatherproof.
KEY BENEFITS
- Tapered design to improve load release
- Internal mitred roll plate
- Fully welded body
- Heavy duty rollers and door hinges with grease points
- Ratchet door locking mechanism with high tensile safety chain and catch
- 600gsm PVC aperture tarp reinforced with full width webbing bands, eyelets and elastic shock cord
CONSTRUCTION
- Steel Grade Plate AS/NZS 1594-HA250
- Steel Grade Structural AS/NZS 3679.1-300, AS1163-C350L0
- Floor Thickness 5 mm
- Wall Thickness 3 mm
- Main Runner 180 pfc
- Frame Member 180 pfc
- Lifting Ring Ø50 mm
- Roller Ø165 mm
- Finish Primed and painted with two (2) coats of premium high gloss enamel
OPTIONAL
- Two end pick-up
- Nylon rollers
- Rubber door seal
- Internal epoxy coating
STANDARD SIZES
- 23m
- 25m
- 30m
- 32m
- 35m
- 38m
To contact Toro Waste Equipment about Toro Stationary Compactor Bins use Get a quote.
Stationary Blade Compactor XL
Stationary Auger Compactor With Shredder
Stationary Double Auger Compactor
Stationary Eco Weighing Compactor
WastePac SC1000 Stationary Compactor
WastePac SS2500 Short Stationary Compactor
WastePac SC2500 Stationary Compactor
Stationary Waste Compactor | Pendulum
Stationary Compactor | SP 1500
Stationary Compactor | S4000
Stationary Compactor | Cardboard Boxes & General Waste | S1500
Stationary Compactor | S1250
Dual Auger Stationary Compactor
Stationary Compactor | ST1000
Stationary Compactor | S2000
Stationary Compactor | S3000
Stationary Compactor | S8000
Stationary Compactor S1500 | Cardboard Boxes & General Waste | Ideal
Stationary Compactor | Marathon RJ 325
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales