Truform Tube Pipe Bender | Square and Round ...

Truform - Tube Pipe Bender | Square and Round

Supplier: Dawn Tools

Tube Pipe Bender | Square and Round

The Dawn TruForm Square and Round Tube/ Pipe Bender have been developed with the cooperation of Australian Tube Mills (Onesteel / Smorgan Steel), to efficiently bend Square and Round Pipes.

13 Recent Views In Stock

Features of this product

The Truform bender can bend pipes in many directions and through various degrees in the shortest possible length of pipe.
This versatile feature means that the Dawn TruForm bender can be used for virtually any application.
Our methodology for pipe bending is simple – it is based on pror pipe bending tooling, proven set-up techniques and several in house tested principles described in our operating manual.

Specifications of this product

Operation: (2500 psi) Mechanical – Rack & pinion gearing
Bend angle range: 1° - 180°
Unit weight: Bender 295kg, Powerpack 93kg, Set of Round formers 150kg, Set of Square formers 110kg
Electric motor: 4 Kw, 1440 RPM, 415V, 3Ph, 30Amps maximum

To contact Dawn Tools about Truform Tube Pipe Bender | Square and Round use Get a quote.

Features of this product

The Truform bender can bend pipes in many directions and through various degrees in the shortest possible length of pipe.
This versatile feature means that the Dawn TruForm bender can be used for virtually any application.
Our methodology for pipe bending is simple – it is based on pror pipe bending tooling, proven set-up techniques and several in house tested principles described in our operating manual.

Specifications of this product

Operation: (2500 psi) Mechanical – Rack & pinion gearing
Bend angle range: 1° - 180°
Unit weight: Bender 295kg, Powerpack 93kg, Set of Round formers 150kg, Set of Square formers 110kg
Electric motor: 4 Kw, 1440 RPM, 415V, 3Ph, 30Amps maximum

Read less...

To contact Dawn Tools about Truform Tube Pipe Bender | Square and Round use Get a quote.

AI Overview BETA

The Truform Square and Round Tube/Pipe Bender forms square and round pipes using rack-and-pinion gearing, and was developed with Australian Tube Mills. Its 1° to 180° bend range lets operators work across a broad spread of angles. Metalworking shops can use its operating manual for setup guidance, including the in-house tested principles used in the bending method.

Electric motor: 4 kW
Motor speed: 1,440 RPM
415 V, three-phase electrical supply
Maximum current: 30 A
Bender: 295 kg; powerpack: 93 kg

Source: listing by Dawn Tools on IndustrySearch · Updated 27 Oct 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Dawn Tools provide you with a quote