Vacuum Excavator | TMC90-500BPJ for sale from Vacvator

Vacuum Excavator | TMC90-500BPJ

Supplier: Vacvator

Vacuum Excavator | TMC90-500BPJ

Multifunctional truck is an exceptionally effective and adaptable unit, perfectly equipped for a wide range of jetting and vacuum excavation missions. Engineered to excel in both performance and productivity, it sets the standard in its class.

Receive 1-3 days from order

The truck is capable of non-destructive digging (NDD), high-pressure jetting, and dry vacuum excavation and can handle large volumes of fine dry material with unparalleled performance.

Operators can use high-pressure air and Vacvator’s filter cleaning technology for hydro excavation, pipe jetting, and dry excavation.

Our machine can use either high-pressure water or air to dig without causing damage. This unit’s Jurop Helix 1500 blower delivers an impressive suction capacity of 9495m3/h (5000cfm) and up to 28Hg of vacuum at a mere 82dBa. Capable of traditional non-destructive digging (NDD) through high-pressure water or offering a swift, economical alternative by utilising high-pressure air to dislodge substrate, which is then conveniently deposited into the tank as dry material.

Offering a high-pressure water jetting system that pumps out an impressive 344lpm at 150Bar and is complemented by a Vacvators purpose-built jetting reel, housing 180m of 1”1/4 high-pressure jetting hose.

Combining intelligent CAN bus technology with straightforward, rugged construction, these units are designed to maximise productivity and profitability. The TMC60-245BPJ is fitted as standard with a reverse camera, load scales, overload protection, remote-controlled boom, and one-touch blower operation to enhance operator safety.

Proven to meet mine and tier one compliance as standard.

Features:

Legally compliant axle loadings at maximum spoil tank payload
Powerful suction – of 9495m3/h (5000cfm) up to 28”Hg (95kPa) vacuum
High volume, high-pressure NDD 30lpm 3600psi (250bar)
Run twin NDD system
Jetting Pump 344 l/min @169 bar (2465psi)
Drain cleaning from rear mounted hose reel
Vacvator’s purpose built jetting reel holds up to 180m of 1 1/4” high-pressure jetting hose
Dewatering valve
Industry-leading filtration and dual cyclone systems
Onboard Packsmart V130 compressor delivering 300CFM
CAN bus controlled “Reverse pulse filter cleaning system” (pulse on demand)
CAN bus controlled “Reverse pulse filter cleaning system” (pulse on demand)
High pressure air spade
Washable poly filters – up to 500hrs between cleaning
Intuitive operation and maintenance
Intelligent CAN bus management system
Remote access telemetry and diagnostics
GPS tracking as an option
Quiet operation 82 dBA at 10” of vacuum
Powered by a Volvo FMX 10x4 (540hp)
Australian designed and manufactured
Full service and support
3 years warranty on all Vacvator manufactured components

To contact Vacvator about Vacuum Excavator | TMC90-500BPJ use Get a quote.

The truck is capable of non-destructive digging (NDD), high-pressure jetting, and dry vacuum excavation and can handle large volumes of fine dry material with unparalleled performance.

Operators can use high-pressure air and Vacvator’s filter cleaning technology for hydro excavation, pipe jetting, and dry excavation.

Proven to meet mine and tier one compliance as standard.

Features:

Legally compliant axle loadings at maximum spoil tank payload
Powerful suction – of 9495m3/h (5000cfm) up to 28”Hg (95kPa) vacuum
High volume, high-pressure NDD 30lpm 3600psi (250bar)
Run twin NDD system
Jetting Pump 344 l/min @169 bar (2465psi)
Drain cleaning from rear mounted hose reel
Vacvator’s purpose built jetting reel holds up to 180m of 1 1/4” high-pressure jetting hose
Dewatering valve
Industry-leading filtration and dual cyclone systems
Onboard Packsmart V130 compressor delivering 300CFM
CAN bus controlled “Reverse pulse filter cleaning system” (pulse on demand)
CAN bus controlled “Reverse pulse filter cleaning system” (pulse on demand)
High pressure air spade
Washable poly filters – up to 500hrs between cleaning
Intuitive operation and maintenance
Intelligent CAN bus management system
Remote access telemetry and diagnostics
GPS tracking as an option
Quiet operation 82 dBA at 10” of vacuum
Powered by a Volvo FMX 10x4 (540hp)
Australian designed and manufactured
Full service and support
3 years warranty on all Vacvator manufactured components

Read less...

To contact Vacvator about Vacuum Excavator | TMC90-500BPJ use Get a quote.

AI Overview BETA

Vacvator’s TMC90-500BPJ is a truck-mounted vacuum excavator that uses water or air for non-destructive digging, and also handles dry excavation and high-pressure jetting. Its Jurop Helix 1500 blower delivers 9,495 m³/h of suction, allowing it to handle large volumes of fine dry material. Mine and tier-one projects suit this unit, which meets those requirements as standard.