Vector Lifting has continued to improve the Underfloor Lifting System (ULS) to assist in the maintenance of Electrical Multiple Units (EMU). The ULS has been developed to raise a single car or multiple car configurations. When raised the ULS will support the carriage/s whilst the bogies are lowered.
The ULS is designed to leave a flat trafficable floor in the maintenance depot for ease of movement of forklifts and machinery when the system is not in use. The Vector Lifting ULS is developed with an adjustable body support claw to allow the system to support multiple configurations of railcar if required and increase the efficiency and safety of servicing the entire fleet.
The ULS is capable of lifting a single car or cars in a group configuration for synchronised vehicle lifts. Below a 12 car, 720 tonne simultaneous lift of the Taiwan High Speed Train is shown.
Multiple car lift configuration to suit the maintenance depot requirements
Height of lift customised to customer requirements
Mobile body support claw to engage with multiple EMU
Radio control or fixed position operation
Captive Key for additional safety
Complete turn-key products
Interlocking with equipment within the maintenance workshop.
Self Locking Lifting Spindle
Lift Nut Wear Limit Detection
Full Capacity Secondary Safety Nut
Lowering Obstruction Detection
Lift and Lower Travel Limits
Lifting Claw Extension and Retraction Limits
With varying site demands, customer preferences and functional requirements, Vector Lifting has the capability to offer products tailored to suit project specifications.
Vector Lifting | design and manufacture of mechanical lifting system and jib cranes
Vector Lifting is an experienced global design and construction consultancy specialising in Railway Lifting Equipment, Jib Cranes and specialised Mechanical Lifting systems. Vector Lifting is at the ...