Australia's #1 industrial directory for equipment & suppliers

Waterproofing Membranes | Enviro Clad

Supplier: Waterproofing Technologies

Enviro Clad is a water-borne single pack acrylic waterproofing membrane with excellent UV, water and alkaline resistance.

CONTACT THIS SUPPLIER TO FIND OUT MORE

Enviro Clad also demonstrates good resistance to carbon dioxide and chloride ion diffusion. The significant anti-mould ingredient gives long lasting protection to exterior walls from fungus and mould attack. Enviro Clad is applied by brush, roller or spray, forming a highly elastic coating with excellent flexibility and colour stability.

Advantages

  • Very low VOC
  • Chloride and CO2 resistant
  • Water based
  • UV resistant
  • Flexible
  • Vapour permeable
  • Waterproof
  • Versatile
  • Mould resistant
  • Single pack

Physical Properties

  • Colour Assorted
  • Finish Matt
  • Volume Solids ˜45%
  • Theoretical spreading rate 3.0m²/L (at dft 150 microns)
  • Flash point N/A
  • Accelerated Weathering 1000 cycles pass (ASTM G53-88)
  • Mould resistant Passed (BS 3900:G6)
  • Elongation >200%
  • Carbon dioxide diffusion resistance equivalent air thickness ≥250m
  • Water vapour diffusion resistance SD = 1.5m
  • Water permeability (highest order) (AST E514)
  • Enviro Clad is unaffected by a range of mild acids, Alkalines, and is resistant to bio-deterioration SG 1.34.
  • Application method Brush/roller Airless spray
  • Thinner (max./vol.) Not recommended Fresh water (10%)
  • Cleaning of tools Fresh Water
  • Indicated film thickness, dry: 150 microns
  • Indicated film thickness, wet: 333 microns
  • Dry to touch 1.0 hours (15°C) 30 minutes (25°C) 15 minutes (35°C)
  • Min. overcoating time 4.0 hours (15°C) 2.0 hours (25°C) 1.0 hours (35°C)

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more