WIDOS Butt Fusion Welder | Miniplast 2

WIDOS - Butt Fusion Welder | Miniplast 2

Supplier: Polyweld Machinery

Butt Fusion Welder | Miniplast 2

1/6

WIDOS Miniplast 2 butt-fusion welder (Ø 20-110mm)

In Stock

The WIDOS Miniplast 2 is a butt-fusion welding machine for PE, PP and PVDF pipes and fittings from Ø 20-110mm. Due to its light and compact construction, the machine is ideally suited for the use in pipeline systems and for assembly work. In case of stationary use, the machine can be fixed in the vice or with the table support. The basic machine has two large aluminium basic clamping tools which swivel 15° on each side for the fabrication of segmented bends. By screwing in 8 small reduction clamping inserts, double clamping is obtained at smaller diameters. For fittings with short legs, a small fitting clamping tool is available as an option. Due to the special construction of the pressure build-up device, the machine can be fixed directly at very short pipe ends on walls and sheets.

The WIDOS Miniplast 2 can be used in the workshop and on the construction site. Weighing only 6.3kg, the WIDOS Miniplast 2 is very easy to manoeuvre and the machine can be used in many ways. The basic machine with optional small fitting clamping tools is suitable for clamping moulded fittings with short clamping ends. Extremely short overhanging pipe ends can be clamped and welded. An extended version for the fabrication of T-pieces and bends 90° (up to OD 90mm) is available. On both sides, each basic clamping tool can be swivelled up to 45°. This basic machine is equipped with vertical and horizontal adjustment. The light and compact manual planer is operated by means of a ratchet. As an option, an electric planer is available. The electronically adjusted heating element in accordance with DVS 2208 features an anti-stick coating and a control lamp for system and interval checking. For the safe storage of the planer and heating element, a heat-protected box is available. The sheet steel carrying case serves for the transport and protected storage of the complete WIDOS Miniplast 2.

Technical Data

General

Material: PP, PE-HD, PVDF, PE 100
Pipe diameter range: Ø 20 - 110mm
Sheet steel carrying case (LxWxH): 450 x 300 x 365mm
Weight (without packing): 30kg
Fuse: 10 A
Wire cross section: 1.5 mm2

Heating Plate

Power: 500W
Voltage: 230V (± 10 %)
Current: 2.2A (± 10 %)
Frequency: 50Hz
Outside Ø: 145mm
Surface: nonstick-coated
Weight: approx. 2kg

Manual Planer

Weight: approx. 2kg

Basic Machine and Table Support

Material frame and clamping devices: Aluminium
Max. force: 600N

Electric Planer (Optional)

Power: 550W
Voltage: 230V
Current: 2.4A
Frequency: 50Hz
Weight: on request

To contact Polyweld Machinery about WIDOS Butt Fusion Welder | Miniplast 2 use Get a quote.