Hughes Wind Region D Safety Shower & Eye ...

Hughes - Wind Region D Safety Shower & Eye Wash

Supplier: Spill Station Australia

Wind Region D Safety Shower & Eye Wash

Wind region D self contained safety shower/eyewash with Zero Power Water Cooler and chemical free water quality maintenance.

Video for Hughes Wind Region D Safety Shower & Eye Wash

Safety Shower Cyclone Rated

14 Recent Views In Stock

Self Contained Safety Shower and Eyewash – 1500L Tank
Engineer certified Wind Region C (Tropical Cyclone) & D (Severe Tropical Cyclone)
50mm insulated tank with GRP surround
AS4775 Compliant
Zero Power Water Cooler available for hot conditions

Australia offers up a wide range of challenging climatic and environmental conditions that makes safety and complying with Australian Standards very difficult. Almost half of Australia’s coastline is rated as prone to tropical cyclones (region C) and severe tropical cyclones (region D).

These regions are usually found in remote areas that are not serviced by mains water and electricity.

The Wind Region D Emergency Tank Shower and Eyewash has been developed by Spill Station to meet the needs of Australian industry in the most hostile of environments.

It is a gravity fed from a fully insulated tank so no pumps or power is required to run the shower/eyewash making it suitable for Zone I &II areas.

The frame is made from re-enforced stainless steel with tie down points located on each corner.

Weight	390 kg
Dimensions	1420 × 1495 × 3746 mm
Features	Low pressure shower rose delivers large quantities of water in an even pattern that is non-injurious to the user. Thermal insulation assists in maintaining the water temperature in the tank to international standards in all climates. Instant activation by panic bar or optional foot panel Optional eye/face wash can be mounted internally or externally. Optional Zero Power Cooler units available for hot climates. Location: Indoor, Outdoor Climate: Hot (risk of over-heating), Cold (risk of freezing), Variable Installation: Free Standing / Floor Mounted Features: Eye/Face Wash Framework: Stainless Steel Capacity (Litres): 1500
Inlet Connection Size & Type	3/4” BSP Female
Shower Operation	Panic bar (optional foot panel control)
Eye/face Wash Operation	Lift lid up (optional foot treadle control)
Supply Pressure	0.5 to 10 BAR G (7 to 145 PSI)
Flow at Operating Pressure	Shower – 76 litres/minute Eye/Face wash – 12 litres/minute
Electrical Equipment – Non-hazardous	Suitable for use in areas classified as non-hazardous
Electrical Equipment – Hazardous	ATEX Zone 1 & 2. Gas groups IIA & IIB. Temp Class T3 (IIC available)
Materials of Construction	Shower Rose: GRP stainless steel Piping & Valve Materials: uPVC and stainless steel Control Valve – Shower: uPVC 11/2” BSP ball valve Control Valve – Eye/face Wash: 1/2” 316L stainless steel full flow ball valve with stainless steel ball Eye/face Wash Strainer: 1/2” stainless steel Overflow: 1” BSP uPVC Ballcock Valve: 2 x 1/2” BSP brass Water Tank: 1500 litre (396 US Gallons) capacity heavy density polyethylene HDPE Tank Surround and Lid: Heavy-duty GRP in white (green or yellow available) Shower Frame and Legs: Stainless steel. Polished brush finish (paint options available) Pull Rods for Valve Activation: Stainless steel Foot Control Options: Panel foot control – Stainless steel/Treadle foot control – powder coated stainless steel All Fasteners and Fixings: Stainless steel
Minimum Ambient Operating Temperature	16º C (60º F) (For 0º C (32º F)
Maximum Ambient Operating Temperature	40º C (104º F) (+55º C (131º F) with cooling unit fitted)

To contact Spill Station Australia about Hughes Wind Region D Safety Shower & Eye Wash use Get a quote.

Self Contained Safety Shower and Eyewash – 1500L Tank
Engineer certified Wind Region C (Tropical Cyclone) & D (Severe Tropical Cyclone)
50mm insulated tank with GRP surround
AS4775 Compliant
Zero Power Water Cooler available for hot conditions

These regions are usually found in remote areas that are not serviced by mains water and electricity.

The Wind Region D Emergency Tank Shower and Eyewash has been developed by Spill Station to meet the needs of Australian industry in the most hostile of environments.

It is a gravity fed from a fully insulated tank so no pumps or power is required to run the shower/eyewash making it suitable for Zone I &II areas.

The frame is made from re-enforced stainless steel with tie down points located on each corner.

Weight	390 kg
Dimensions	1420 × 1495 × 3746 mm
Features	Low pressure shower rose delivers large quantities of water in an even pattern that is non-injurious to the user. Thermal insulation assists in maintaining the water temperature in the tank to international standards in all climates. Instant activation by panic bar or optional foot panel Optional eye/face wash can be mounted internally or externally. Optional Zero Power Cooler units available for hot climates. Location: Indoor, Outdoor Climate: Hot (risk of over-heating), Cold (risk of freezing), Variable Installation: Free Standing / Floor Mounted Features: Eye/Face Wash Framework: Stainless Steel Capacity (Litres): 1500
Inlet Connection Size & Type	3/4” BSP Female
Shower Operation	Panic bar (optional foot panel control)
Eye/face Wash Operation	Lift lid up (optional foot treadle control)
Supply Pressure	0.5 to 10 BAR G (7 to 145 PSI)
Flow at Operating Pressure	Shower – 76 litres/minute Eye/Face wash – 12 litres/minute
Electrical Equipment – Non-hazardous	Suitable for use in areas classified as non-hazardous
Electrical Equipment – Hazardous	ATEX Zone 1 & 2. Gas groups IIA & IIB. Temp Class T3 (IIC available)
Materials of Construction	Shower Rose: GRP stainless steel Piping & Valve Materials: uPVC and stainless steel Control Valve – Shower: uPVC 11/2” BSP ball valve Control Valve – Eye/face Wash: 1/2” 316L stainless steel full flow ball valve with stainless steel ball Eye/face Wash Strainer: 1/2” stainless steel Overflow: 1” BSP uPVC Ballcock Valve: 2 x 1/2” BSP brass Water Tank: 1500 litre (396 US Gallons) capacity heavy density polyethylene HDPE Tank Surround and Lid: Heavy-duty GRP in white (green or yellow available) Shower Frame and Legs: Stainless steel. Polished brush finish (paint options available) Pull Rods for Valve Activation: Stainless steel Foot Control Options: Panel foot control – Stainless steel/Treadle foot control – powder coated stainless steel All Fasteners and Fixings: Stainless steel
Minimum Ambient Operating Temperature	16º C (60º F) (For 0º C (32º F)
Maximum Ambient Operating Temperature	40º C (104º F) (+55º C (131º F) with cooling unit fitted)

Read less...

To contact Spill Station Australia about Hughes Wind Region D Safety Shower & Eye Wash use Get a quote.

Spill Station Australia - Wind Region D Emergency Tank Shower(0.09MB)

AI Overview BETA

The Hughes Wind Region D safety shower and eyewash is a self-contained emergency wash station supplied by a 1,500 L tank. A low-pressure shower rose spreads water in an even pattern designed not to injure the user. Remote Australian industrial sites without mains water or electricity suit its gravity-fed supply, which operates without pumps or power.

AS 4775 compliant; ATEX Zone 1 & 2
Optional Zero Power Water Cooler for hot conditions
50 mm insulated tank with GRP surround
Shower flow: 76 litres/minute; eyewash flow: 12 litres/minute
Supply pressure: 0.5 to 10 bar G

Source: listing by Spill Station Australia on IndustrySearch · Updated 4 Nov 2026
Supplier document: Spill Station Australia - Wind Region D Emergency Tank Shower (PDF)

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Spill Station Australia provide you with a quote