Ultimate LED - Workplace Safety Halo Danger Zone Work Light System. Red Line 9 watt

Forklift Warehouse Safety Halo System. SHRL-S2B. Series 2B.

Red Danger Zone Warning Light, for Forklift Material & Handling
Side Warning Light - No Go Zone.....

Small Compact Unit to fit into the Tight Area's

Light up work areas of danger, workplace intersections, workplace walkways, production line danger areas, walkway crossings.

30% Brighter than the other lights.

This light has many applications and creates a safe work environment in the warehouse and also night construction work.

Showing your staff where the Danger Zone Is....

Our Lights are the brightest Red Safety Halo light on the market. This light is 30% brighter than every other light on the market

We have been involved in the new safety warehouse lights for over 5 years and we are the first to introduce theses lights into the Australia Market.

We have a wide range of warehouse safety lights.

Red triggers a safety switch in our minds.

Ultimate LED's Series LED Pedestrian Warehouse Workplace Safety Halo Lights are designed specifically for material handling applications to provide a visual warning for pedestrians in the vicinity of mobile equipment.

These lights are intended as a supplemental safety device in addition to a 360º warning light and project a red, 290 lumen line beam onto the ground either side of the vehicle.

Featuring 9-80V DC operation, an aluminium housing and polycarbonate lens, the SHRL-S2B is extremely resistant to impact and vibration damage and has an IP67 ingress

protection rating.

This light has many applications. Create No Go Zones in your work place, NO more painting the floor. Mounted in production line areas, Loading Bays, Danger Areas, Conveyer belt areas ETC.

Big saving on maintenance costs. Fit and Forget.

You will require 3 lights to create a 3/4 Safety Halo.

Pricing is per light. Optional Mounting Brackets Available. No welding or drilling.

Talk to us so we can quote on your requirements.

This is a warehouse light system.

Red out performs blue every time so do not be fooled. 

 .

Your Forklift Company only supply the basics of lights to sell you the forklift
We have a wide range of quality lights to upgrade your machine to increase the safety in your workplace

Demonstration lights are available on request
We can come to your workplace and demonstrate our Safety Light Range
We can mail to you, our Demonstration Lights (Conditions Apply)
Contact us for more details.

Introduction and Testing Kit for your application is also available on request.

Specifications:
Part Number	SHRL-S2B
Number of LED's	Quality 3 x 3 Watt Cree LED's
Light Output	290lm Red Line Beam
Watts	9 Watts
Input Voltage	10-80 Volt DC
Current Draw	1.10Amps @ 13.8 Volt DC. 0.60Amps @ 24 Volt DC
IP Rating	IP67 Water & Dust Proof
Vibration Rating	Vibration Resistant 7g
Housing Construction	Die Cast Aluminium
Lens Construction	Polycarbonate
Dimensions	66 x 76 x 67mm
Wiring	500mm Sheathed Cable
Operation Temperature	-40 to +65 Degree C
Warranty Approval	2 year ECC (ECE R10)

What is the purpose of the Red Zone Danger Area Warning Light

40% of all forklift accidents involves a pedestrian. Ensure pedestrians stay a safe distance away from the forklift with the Red Zone Warning Light. The Red Zone puts a bright red line on the floor, near the forklift, to show pedestrians where they are not allowed. This zone can also be called the SAFETY HALO zone and can be adjusted to the distance of your choice. The Red Zone (Safety Halo Zone) helps prevent foot injuries and collisions from rear end swing, as well as showing the NO Go Zone around any piece of mobile equipment. Each company can set their own NO Go Zone or SAFETY HALO ZONE distance. A standard distance is 1 metre but you can increase this to your requirements. This light is easily installed by an Auto Electrician into your ignition system. The light will activate every time the ignition of the machine is turned on. It has a low power draw, no extra heavy duty wiring required..

What Type of forklifts can the Red Zone be used on?

The Red SAFETY HALO lights were designed for any forklift used primarily indoors. They can be used on any type of forklift including sit downs, stand ups, tuggers and more. The Red Safety Halo lights can be used on fuel, gas and electric forklifts etc. While the Red Zone lights are weatherproof and can be taken outside, they are not bright enough to be effective outside on sunny days. They will be more effective outside during dust, dawn and night times. This light is not UL rated for hazard area's. The Red Zone Light can be combined with other warning lights on your machine.

Mounting brackets are available, no welding or drilling into the operators safety cage. Easy to install.

We are passionate about workplace safety and the quality of our lights that we supply.

Give us a call if you require any more information.

Warren 0488 990 396

E: [email protected] 

! CAUTION

• All wiring should be done by a licensed electrician in accordance with state codes, local codes, National Electric Code (NEC) standards and International standards.
• Improper installation may result in serious injury and void warranty.
• Contains parts and assemblies susceptible to damage by electrostatic discharge (ESD).
• Surge protective devices should be utilised for fixtures installed in environments subject to power surges outside the specified operating parameters.
• The Danger Light is designed and intended to provide visual indication of potentially unsafe locations for equipment, personnel or assets near or around moving equipment. By itself, the Danger Light does not provide any physical or location collision avoidance. Proper installation, aiming and maintenance of the Danger Light is critical to its effectiveness as an indicator of potentially unsafe areas. Ultimate LED and its distributors are not liable for collisions caused by improper installation or poor work practices. 

Read more...

To contact Ultimate LED about Ultimate LED Workplace Safety Halo Danger Zone Work Light System. Red Line 9 watt use Get a quote.

 .

• All wiring should be done by a licensed electrician in accordance with state codes, local codes, National Electric Code (NEC) standards and International standards.
• Improper installation may result in serious injury and void warranty.
• Contains parts and assemblies susceptible to damage by electrostatic discharge (ESD).
• Surge protective devices should be utilised for fixtures installed in environments subject to power surges outside the specified operating parameters.
• The Danger Light is designed and intended to provide visual indication of potentially unsafe locations for equipment, personnel or assets near or around moving equipment. By itself, the Danger Light does not provide any physical or location collision avoidance. Proper installation, aiming and maintenance of the Danger Light is critical to its effectiveness as an indicator of potentially unsafe areas. Ultimate LED and its distributors are not liable for collisions caused by improper installation or poor work practices. 

Read less...

To contact Ultimate LED about Ultimate LED Workplace Safety Halo Danger Zone Work Light System. Red Line 9 watt use Get a quote.