WPS 140MM Inground Removable Bollard

WPS - 140MM Inground Removable Bollard

140MM Inground Removable Bollard

The 140mm Inground Removable Bollard is used when permanent bollards are not suitable. It has a galvanised inground sleeve with cap that is core drilled into concrete and set level with the finished ground level.

In Stock

The sleeve can be passed over when the bollard is not in place and creates no trip hazards or obstacles that need to be avoided by vehicles or pedestrians. When the bollard is required you simply lift the cover and install the bollard which is then locked in place with a padlock (supplied). All components are hot dip galvanised, powder coated safety yellow for longevity and has a reflective strip for safety.

Specifications:

140mm (Dia) x 1200mm (H), 250mm Sleeve -Powder coated Safety Yellow
Hot Dip Galvanised for extended life outdoors
Reflective Band
Steel Cap
Padlock supplied

Recommend Applications:

Car Parks
Driveways
Doorways
Ramps
Walkways
Paths

To contact Warehouse Safety Solutions about WPS 140MM Inground Removable Bollard use Get a quote.

Specifications:

140mm (Dia) x 1200mm (H), 250mm Sleeve -Powder coated Safety Yellow
Hot Dip Galvanised for extended life outdoors
Reflective Band
Steel Cap
Padlock supplied

Recommend Applications:

Car Parks
Driveways
Doorways
Ramps
Walkways
Paths

Read less...

To contact Warehouse Safety Solutions about WPS 140MM Inground Removable Bollard use Get a quote.

AI Overview BETA

The WPS 140 mm Inground Removable Bollard provides a removable barrier where a permanent bollard is not suitable. Its inground sleeve sits level with the finished ground when the bollard is removed, leaving no obstacle for vehicles or pedestrians to avoid. Car parks, driveways, doorways, ramps, walkways and paths suit this bollard, which locks in place with the supplied padlock.