Zacmi - Internal Valve Vacuum Liquid Filler

Vacuum Fillers are designed to fill up metallic or glass recipients that already contain solid product, with a preserving liquid such as brine. Vacuum Fillers are classified as “internal valve” when the filling valves are inside the tank and as “external valve” when the valves are outside. The Vacuum Fillers are equipped with a system to create vacuum by means of a dedicated pump and rotary distributor.  This system expels the air from the containers and then fills them up with the preserving liquid. During its operating cycle, a table top chain conveyor leads the containers to the variable pitch feeding worm screw that facilitates their introduction. The feeding worm screw is synchronised with the inlet star that transfers the containers to the Filler. At the beginning of the filling area, the containers activate the “no can – no fill” device for access to the first phase of the operating cycle. The filling operation is regulated by a lever that commands the opening of the filling valve to allow the preserving liquid to flow from the tank into the containers. Once the final phase is complete, the containers are transferred to the Seamer or Capper.

To contact Esko Australia Pty Ltd about Zacmi Internal Valve Vacuum Liquid Filler use Get a quote.

Vacuum Fillers are designed to fill up metallic or glass recipients that already contain solid product, with a preserving liquid such as brine. Vacuum Fillers are classified as “internal valve” when the filling valves are inside the tank and as “external valve” when the valves are outside. The Vacuum Fillers are equipped with a system to create vacuum by means of a dedicated pump and rotary distributor.  This system expels the air from the containers and then fills them up with the preserving liquid. During its operating cycle, a table top chain conveyor leads the containers to the variable pitch feeding worm screw that facilitates their introduction. The feeding worm screw is synchronised with the inlet star that transfers the containers to the Filler. At the beginning of the filling area, the containers activate the “no can – no fill” device for access to the first phase of the operating cycle. The filling operation is regulated by a lever that commands the opening of the filling valve to allow the preserving liquid to flow from the tank into the containers. Once the final phase is complete, the containers are transferred to the Seamer or Capper.

Read less...

To contact Esko Australia Pty Ltd about Zacmi Internal Valve Vacuum Liquid Filler use Get a quote.