3D Printer | Fortus 380mc and 450mc Production Systems

Read more...

To contact Objective3D about 3D Printer | Fortus 380mc and 450mc Production Systems use Get a quote.

The Fortus 380mc and Fortus 450mc 3D production systems let you build, accurate, repeatable parts faster than ever before. Produce jigs, fixtures, factory tooling and end-use parts, as well as functional prototypes to withstand stringent testing. With four layer thicknesses to choose from, you can strike the right balance between strength, detail, and FDM’s fastest build time.

For maximum time savings, Fortus 380mc and Fortus 450mc build complex parts faster than their predecessors. Both feature an all-new touchscreen interface for straightforward operation and maintenance.

Fortus 380mc

• Build parts as large as 355x305x305mm significantly faster than the Fortus 360mc, especially for complex geometries. The Fortus 380mc offers the same fast build time as the 400mc, and works with seven standard and engineering thermoplastics.

Fortus 450mc

• Build parts as large as 406x355x406 . The Fortus 450mc works with 9 standard, engineering and high-performance thermoplastics.

Materials

Both the Fortus 380mc and Fortus 450mc systems work with these production-grade thermoplastics:

• ABS-M30 in six colors for great tensile, impact and flexural strength and environmental stability.
• ABS-M30i for biocompatibility.
• ABS-ESD7 for static dissipation.
• ASA for UV stability and the best aesthetics.
• PC-ISO for biocompatibility and superior strength.
• PC for superior mechanical properties and heat resistance.
• FDM Nylon 12 for maximum toughness.

The Fortus 450mc also works with ULTEM 9085 and ULTEM 1010 for high strength-to-weight ratio and favorable FST rating.

Specifications

• Build envelope options:
  
  • Fortus 380mc: 355 x 305 x 305 mm (14 x 12 x 12 in.).
  • Fortus 450mc: 406 x 355 x 406 mm (16 x 14 x 16 in.).
• Material delivery options:
  • Fortus 380mc: One bay each for material and support canisters.
  • Fortus 450mc: Two bays each for material and support canisters.
• Layer thicknesses:
  • 0.330 mm (0.013 in.).
  • 0.254 mm (0.010 in.).
  • 0.178 mm (0.007 in.).
  • 0.127 mm (0.005 in.).
• Support structure: Soluble for most materials; break-away for PC-ISO and ULTEM; soluble or break-away for PC.
• System size/weight: 127 x 90.17 x 194.31 cm (50 x 25.5 x 76.5 in.)/with crate: 680 kg (1,500 lbs.), without crate: 601 kg (1,325 lbs.).
• Achievable accuracy: Parts are produced within an accuracy of ± .127 mm (± .005 in.) or ± .0015 mm/mm (± .0015 in/in), whichever is greater. (Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.)
• Network communication: 10/100 base T connection; Ethernet protocol.
• Power requirements: 230 VAC, 50/60 Hz, 3 phase, 16A/phase (20 amp dedicated circuit required).
• Regulatory compliance: CE.
• Special facility requirements: None.

Read less...

To contact Objective3D about 3D Printer | Fortus 380mc and 450mc Production Systems use Get a quote.