4 Post Parking Lift Hoist 4.0T | Hammerhead ...
4 Post Parking Lift Hoist 4.0T | Hammerhead
(7)-375x300.jpg)
(7)-70x60.jpg)
Australia’s Newest Best Value 4 Post Parking Lift has arrived. It’s perfect for recreational or home use. Our Hammerhead Hoists have got you covered.
- 4000KG / 4.0 Tonne Load Limit
- Powder Coated Finish
- Adjustable lifting height with maximum height of 2.0 m
- One side release for safety locks, easy for descent operation
- External Locking
- 4-point pneumatic safety lock releases
- Additional secondary safety lock when weight comes off the cables
- Runways must first be raised a fraction before the safety locks will operate to allow the car hoist to be lowered
- Heavy duty 6mm thick cross beams and 5mm thick runways
- 9.53mm steel wire rope equalising cables
- Anti-surge valve
- 4 post hoist with all bolts, cables, lines and fixings
- 240V single phase hydraulic power unit
- Casters, Jack Tray , Drop Tray
- Detailed installation instructions
- We offer a secondary lift to be able to easily jack your cars up while on the hoist.
- S71.040.4PSTD-LIFT
- Oil Drip Trays are available to keep your area clean from any spills.
- 150mm deep concrete at 32mpa
- Minimum ceiling height of 3.6m
- 3 Year Australian Warranty – Includes Structure, Hydraulic & Electrics
- CE Certified
To contact Jimy Tools about 4 Post Parking Lift Hoist 4.0T | Hammerhead use Get a quote.
- 4000KG / 4.0 Tonne Load Limit
- Powder Coated Finish
- Adjustable lifting height with maximum height of 2.0 m
- One side release for safety locks, easy for descent operation
- External Locking
- 4-point pneumatic safety lock releases
- Additional secondary safety lock when weight comes off the cables
- Runways must first be raised a fraction before the safety locks will operate to allow the car hoist to be lowered
- Heavy duty 6mm thick cross beams and 5mm thick runways
- 9.53mm steel wire rope equalising cables
- Anti-surge valve
- 4 post hoist with all bolts, cables, lines and fixings
- 240V single phase hydraulic power unit
- Casters, Jack Tray , Drop Tray
- Detailed installation instructions
- We offer a secondary lift to be able to easily jack your cars up while on the hoist.
- S71.040.4PSTD-LIFT
- Oil Drip Trays are available to keep your area clean from any spills.
- 150mm deep concrete at 32mpa
- Minimum ceiling height of 3.6m
- 3 Year Australian Warranty – Includes Structure, Hydraulic & Electrics
- CE Certified
To contact Jimy Tools about 4 Post Parking Lift Hoist 4.0T | Hammerhead use Get a quote.
The Hammerhead four-post parking lift raises vehicles, with a 4.0-tonne load limit. Before lowering, raise the runways slightly so the four-point pneumatic safety locks can release; the one-side release operates these locks for descent. Recreational and home users get bolts, cables, lines, fixings, casters, a jack tray, a drop tray and detailed installation instructions with the hoist.
- Adjustable lift height reaches a maximum of 2.0 m
- Secondary safety lock engages when weight comes off the cables
- 240 V single-phase hydraulic power unit included
- 3-year Australian warranty covers structure, hydraulics and electrics
- Requires 150 mm-deep concrete at 32 MPa; minimum ceiling height 3.6 m
Source: listing by Jimy Tools on IndustrySearch · Updated 2 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Jimy Tools on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
(7)-280x280-state_7.jpg)
4 Post Parking Lift Hoist 4.0T | Hammerhead
Toolbox Drawer & Storage Case | 41
5PC Torque Multiplier & Tensioner Set & Torque Wrench 3/4" SQ Drive
3/4" Square Drive Composite Air Impact Wrench & 1" Air Impact Wrench
1/2″ Impact Wrench & 3/4" Impact Wrench (Combo Deal)
1/2″ Impact Wrench & Die Grinder & Ratchet Wrench 3/8" Combo Deal
2 Post Parking Lift 3 ton capacity (240V) | BP2700T
4 Post Parking Hoist | 3.5 Ton High Position - TL3.5PH
2 Post Parking Hoist | 2.7 Ton Full Platform Compact - TL2.7HP
4 Post Parking Hoist | 4 Ton Twin Platform – TLD4.0TPL5.0M
4 Post Parking Hoist | 4 Ton 7 Meter Extra Long - TL4.0PH-7M
4 Post Parking Hoist | 4 Ton - TL4.0PH
4 Post Parking Hoist | 4 Ton - TLV4.0PH
4 Post Parking Hoist | 3.6 Ton Standard Height - TL3.6PH-S
4 Post Parking Hoist | 3 Tier - TLM-3TPH
4 Post Parking Hoist | 3.6 Ton Extra Height - TL3.6PH-H
Parking Hoist – 4 Post- 4.0 ton-CL4000HP
4 Post Parking Vehicle Hoist | Lift King 9
4 Post Parking Hoist | 9 Pro & 9 Pro/E
2 Post Parking Lift
Post Parking Lift | Hydro park TPTP-2
4 Post Car Parking Hoist | HAPP25
Car Stacker Post Parking Lift | 3 Car AL- HP2625
Car Stacker Post Parking Lift | 3 Car HP2525 4 Post Storage Hoist
Car Stacker Post Parking Lift | AutoLift AL-1118
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales