5PC Torque Multiplier & Tensioner Set & Torque Wrench 3/4" SQ Drive Price Guide: $699

Read more...

To contact Jimy Tools about 5PC Torque Multiplier & Tensioner Set & Torque Wrench 3/4" SQ Drive use Get a quote.

There are times when you need to apply a significant amount of torque to a bolt or nut and brute force alone no matter how long a piece of pipe you use will not do the job safely or accurately. With current OH&S regulations using the right tool for the job is a major consideration.

The solution is a Torque Multiplier from Jimy Tools.  The torque multiplier kit provides the much needed power and leverage to tighten or loosen those stubborn nuts and bolts. A small amount of torque input on your end yields a large amount of output torque on the nut or bolt, which makes your job easier and safer.

When using the multiplier with a torque wrench, the fastener will tension to the desired level. The torque is applied smoothly and with much less physical effort required by the user.  Don’t try to tackle large nuts and bolts without the Torque Multiplier Kit from Jimy Tools.

Specifications

• 3/4”Dr Input 1”Dr Output
• Max Torque 2500 Nm (1844 ft-lbs)
• Torque Ratio 1 : 3.3

Included in the kit

• 1 x  Torque Multiplier
• 1 x  380mm Reaction Bar
• 1 x  90’ Reaction Base
• 1 x  90’ Reaction Bar
• 1 x  Break Away Safety Adapter (will shear if you exceed torque limit)
• 1 x  Storage and carrying case with locks and handle

Caution: Never use air or electric impact guns with a torque multiplier. Always use impact sockets with a torque multiplier.

TORQUE WRENCH 3/4” SQUARE DRIVE

The Jimy Tools 3/4” square drive torque wrench is made from high quality chrome Vanadium steel (Cr-V) and precision engineered to give years of trouble free service. Featuring a reversible ratchet head, micrometer style torque adjustment and is marked in both Nm and Ft/Lb increments. Supplied with a sturdy blow mould case this torque wrench represents excellent value for money and is covered by Jimy’s lifetime warranty.

** When storing your torque wrench set the tension adjustment back to zero**

Specifications

• 3/4” square drive
• Micrometer style adjustment
• Torque range 150 – 800 Nm (129 – 572 Ft/Lb)
• High quality chrome Vanadium steel (Cr-V) for strength and durability
• Tested to DIN-ISO-6789 international standards
• Certificate of Calibration provided
• High quality reversible ratchet head
• Blow mould case

Read less...

To contact Jimy Tools about 5PC Torque Multiplier & Tensioner Set & Torque Wrench 3/4" SQ Drive use Get a quote.