Alpha Magnetics Magnetic Pulley | Magnetic ...
Alpha Magnetics - Magnetic Pulley | Magnetic Separation Pulleys
Magnetic Separation Pulleys replace existing head pulleys in belt conveyors. They are used for continuously separating ferrous contaminants from the product flow at the point of discharge.
The radial magnetic field ensures the tramp metal is held and separated from the product as it flows off the end of the conveyor. Can be used stand-alone or in conjunction with a matching Magnetic Take-off Rail which carries the ferrous material further back away from the pulley before release. Available in a range of sizes to fit your diameter and belt width. The shaft can be machined to your specification.
Product Specifications:
Standard diameters and maximum face widths are tabled below. The effective magnetic reach out distance varies with the pulley diameter and this table can be used as a guide.
| Diameter (mm) | Maximum Face Width (mm) | Magnetic Reach Out (mm) |
Maximum recommended operating speed (metres/sec)
|
| 141 | 1200 | 25 | 0.33 |
| 168 | 1200 | 30 | 0.45 |
| 219 | 1200 | 45 | 0.65 |
| 254 | 1200 | 50 | 0.76 |
| 273 | 1250 | 55 | 0.81 |
| 305 | 1350 | 60 | 0.89 |
| 323 | 1400 | 65 | 0.92 |
| 355 | 1450 | 75 | 0.98 |
| 381 | 1500 | 80 | 1.01 |
To contact Alpha Magnetics about Alpha Magnetics Magnetic Pulley | Magnetic Separation Pulleys use Get a quote.
The radial magnetic field ensures the tramp metal is held and separated from the product as it flows off the end of the conveyor. Can be used stand-alone or in conjunction with a matching Magnetic Take-off Rail which carries the ferrous material further back away from the pulley before release. Available in a range of sizes to fit your diameter and belt width. The shaft can be machined to your specification.
Product Specifications:
Standard diameters and maximum face widths are tabled below. The effective magnetic reach out distance varies with the pulley diameter and this table can be used as a guide.
| Diameter (mm) | Maximum Face Width (mm) | Magnetic Reach Out (mm) |
Maximum recommended operating speed (metres/sec)
|
| 141 | 1200 | 25 | 0.33 |
| 168 | 1200 | 30 | 0.45 |
| 219 | 1200 | 45 | 0.65 |
| 254 | 1200 | 50 | 0.76 |
| 273 | 1250 | 55 | 0.81 |
| 305 | 1350 | 60 | 0.89 |
| 323 | 1400 | 65 | 0.92 |
| 355 | 1450 | 75 | 0.98 |
| 381 | 1500 | 80 | 1.01 |
To contact Alpha Magnetics about Alpha Magnetics Magnetic Pulley | Magnetic Separation Pulleys use Get a quote.
Alpha Magnetics magnetic separation pulleys replace existing head pulleys on belt conveyors and continuously separate ferrous contaminants from the product flow. Its radial magnetic field holds tramp metal as material leaves the belt, separating it from the product at discharge. For belt-conveyor head-pulley replacements, buyers can specify the shaft machining required for their own installation.
- Matching Magnetic Take-off Rail carries ferrous material farther from pulley before release
- Standard pulley diameters: 141–381 mm
- Maximum face widths span 1,200–1,500 mm across the range
- Magnetic reach out: 25–80 mm, varying with pulley diameter
- Maximum recommended operating speed: 0.33–1.01 metres/sec
Source: listing by Alpha Magnetics on IndustrySearch · Updated 30 Oct 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Alpha Magnetics on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
-280x280-state_7.jpg)
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales