Altec Pressure Digger | HD35A-30

Altec - Pressure Digger | HD35A-30

Supplier: Altec Australia

Pressure Digger | HD35A-30

The HD35A-30 is available with a digging depth of 30 ft, and is capable of easily driving augers up to 72″ in diameter.

In Stock

Features of this product

Non-Insulating Pressure Digger
Continuous Digging Capacity to 72 in (1830 mm) Dia. Hole
High Performance Inertia Drive System
Ergonomic Work Station
Cummins 160 hp Diesel Engine
Drive Torque to 30,000 ft-lb (40,675 N.m)
Variable Speed Drive System to 160 RPM
3.5 in (90 mm) Square Kelly Bar for Increased Resistance to Bending
Mast Leveling, 20° to Left, Right and Rear
Set-Up Mast Without Paying-Out Winch Line
240° Rotation
Main Digger Frame Extends and Retracts 36 in (914 mm)
Subbase Mounting for 120 in (3048 mm) Chassis
Ram Cylinder Extend Force to 35,640 lb (16,167 kg)
Tool Storage and Drop Pocket
50 gal (189.3 L) Fuel Tank Capacity

Specifications of this product

Nominal Digging Depth: 30 ft (9.1 m)
Lowest Overall Working Height Mast/Pole-Setter Retracted: 40.6 ft (12.4 m)

To contact Altec Australia about Altec Pressure Digger | HD35A-30 use Get a quote.

Features of this product

Non-Insulating Pressure Digger
Continuous Digging Capacity to 72 in (1830 mm) Dia. Hole
High Performance Inertia Drive System
Ergonomic Work Station
Cummins 160 hp Diesel Engine
Drive Torque to 30,000 ft-lb (40,675 N.m)
Variable Speed Drive System to 160 RPM
3.5 in (90 mm) Square Kelly Bar for Increased Resistance to Bending
Mast Leveling, 20° to Left, Right and Rear
Set-Up Mast Without Paying-Out Winch Line
240° Rotation
Main Digger Frame Extends and Retracts 36 in (914 mm)
Subbase Mounting for 120 in (3048 mm) Chassis
Ram Cylinder Extend Force to 35,640 lb (16,167 kg)
Tool Storage and Drop Pocket
50 gal (189.3 L) Fuel Tank Capacity

Specifications of this product

Nominal Digging Depth: 30 ft (9.1 m)
Lowest Overall Working Height Mast/Pole-Setter Retracted: 40.6 ft (12.4 m)

Read less...

To contact Altec Australia about Altec Pressure Digger | HD35A-30 use Get a quote.

Altec Australia_Pressure Digger HD35A-30_Brochure(2.21MB)

AI Overview BETA

The Altec HD35A-30 is a non-insulating pressure digger that drills holes to a nominal depth of 30 ft. Its variable-speed drive runs at up to 160 RPM, letting operators set auger rotation speed during drilling operations. Mast levelling to the left, right and rear gives crews options for adjusting the digger angle before each drilling setup.